Knife Holders - Double (Chip) Knife
Home › Parts Shop › Vits › Knife Holders - Double (Chip) Knife
-
12″ – Double (Chip) Knife Holder Assembly
Part #: KCO-12-DCS-25V
Add to QuoteFor Use With: Vits Rotary Cutters
Features:
– 25.984″ (660mm) Circumference.
– Can be configured to take chip cuts between 1/4″ (.250″) – 1/2″ (.500″) in size within a single knife holder.
– Dual function knife holder – Can be utilized as a single (chop) cut knife holder with the removal of the chip spacer and front plate.
– Includes all internal hardware (modified tab plunger, barrel insert, set screw and spring), and chip spacers (.125″ and .375″ or .250″ with notched front plate).
– 0.500″ chip set-up utilizes three standard replacement 12″ (4 notch) cutting blades or two heavy duty 12″ 4-point cutting blades.
– 0.250″ chip set-up utilizes two standard replacement 12″ (4 notch) cutting blades and notched front plate.*Please specify chip size when ordering.
-
20″ – Double (Chip) Knife Holder Assembly
Part #: KCO-20-DCS-25V
Add to QuoteFor Use With: Vits Rotary Cutters
Features:
– 25.984″ (660mm) Circumference.
– Can be configured to take chip cuts between 1/4″ (.250″) – 1/2″ (.500″) in size within a single knife holder.
– Dual function knife holder – Can be utilized as a single (chop) cut knife holder with the removal of the chip spacer and front plate.
– Includes all internal hardware (modified tab plunger, barrel insert, set screw and spring), and chip spacers (.125″ and .375″ or .250″ with notched front plate).
– 0.500″ chip set-up utilizes three standard replacement 20″ (6 notch) cutting blades or two heavy duty 20″ 4-point cutting blades.
– 0.250″ chip set-up utilizes two standard replacement 20″ (6 notch) cutting blades and notched front plate.*Please specify chip size when ordering.
-
![Placeholder]()
24″ – Double (Chip) Knife Holder Assembly
Part #: KCO-24-DCS-25V
Add to QuoteFor Use With: Vits Rotary Cutters
Features:
– 25.984″ (660mm) Circumference.
– Can be configured to take chip cuts between 1/4″ (.250″) – 1/2″ (.500″) in size within a single knife holder.
– Dual function knife holder – Can be utilized as a single (chop) cut knife holder with the removal of the chip spacer and front plate.
– Includes all internal hardware (modified tab plunger, barrel insert, set screw and spring), and chip spacers (.125″ and .375″ or .250″ with notched front plate).
– 0.500″ chip set-up utilizes three standard replacement 24″ (8 notch) cutting blades or two heavy duty 24″ 4-point cutting blades.
– 0.250″ chip set-up utilizes two standard replacement 24″ (8 notch) cutting blades and notched front plate.*Please specify chip size when ordering.
-
Modified Swing Hinge Connector
Part #: KCO-250-E
Add to QuoteFor Use With: KCO Style Double (Chip) Knife Holder Assembly
Features:
– Modified swing hinge connector allows for 1/4″ – 3/8″ chip spacer and front plate lockup. -
28″ – Double (Chip) Knife Holder Assembly
Part #: KCO-28-DCS-25V
Add to QuoteFor Use With: Vits Rotary Cutters
Features:
– 25.984″ (660mm) Circumference.
– Can be configured to take chip cuts between 1/4″ (.250″) – 1/2″ (.500″) in size within a single knife holder.
– Dual function knife holder – Can be utilized as a single (chop) cut knife holder with the removal of the chip spacer and front plate.
– Includes all internal hardware (modified tab plunger, barrel insert, set screw and spring), and chip spacers (.125″ and .375″ or .250″ with notched front plate).
– 0.500″ chip set-up utilizes three standard replacement 28″ (10 notch) cutting blades or two heavy duty 28″ 4-point cutting blades.
– 0.250″ chip set-up utilizes two standard replacement 28″ (10 notch) cutting blades and notched front plate.*Please specify chip size when ordering.
-
Modified Swing Hinge Connector
Part #: KCO-500-E
Add to QuoteFor Use With: KCO Style Double (Chip) Knife Holder Assembly
Features:
– Modified swing hinge connector allows for 1/2″ chip spacer and front plate lockup. -
0.125″ Chip Spacer
Part #: KCO-XX-25V-125CS
Add to QuoteFor Use With: Vits Double (Chip) Knife Holder Assembly
Features:
– Precision machined to accommodate for .125″ chip.
– Can be manufactured in lengths of 12″, 20″, 24″ or 28″.* Please specify length when ordering.
-
0.250″ Chip Spacer
Part #: KCO-XX-25V-250CS
Add to QuoteFor Use With: Vits Double (Chip) Knife Holder Assembly
Features:
– Precision machined to accommodate for .250″ chip.
– Utilized with notched front plate (part #PL-250-XX)
– Can be manufactured in lengths of 12″, 20″, 24″ or 28″* Please specify length when ordering.
-
0.375″ Chip Spacer
Part #: KCO-XX-25V-375CS
Add to QuoteFor Use With: Vits Double (Chip) Knife Holder Assembly
Features:
– Precision machined to accommodate for .375″ chip.
– Can be manufactured in lengths of 12″, 20″, 24″ or 28″* Please specify length when ordering.
-
Front Plate
Part #: PL-250-XX
Add to QuoteFor Use With: Vits Double (Chip) Knife Holder Assembly
Features:
– Standard replacement front plate.
– Utilized with .250″ chip spacer set-up.
– Can be manufactured in lengths of 12″, 20″, 24″, or 28″.* Please specify length when ordering.
Part not listed?
We are experts at sourcing and manufacturing spare parts and consumables. We are confident that we can find or manufacture you the parts your operation needs!