General Inline Finishing Parts
Home › Parts Shop › General Inline Finishing Parts
-
Sheet – Black Foam Rubber – 1/8″ Thick x 8″ Wide x 24″ Long
Part #: *BFR-125-8-24
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/8″ Thick x 8″ Wide x 24″ Sheet
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.* Other sheet thicknesses and sizes are available – Please Call.
View Sheet – Black Foam Rubber – 1/8″ Thick x 8″ Wide x 24″ Long PDF
-
Sheet – Black Foam Rubber – 1/4″ Thick x 8″ Wide x 24″ Long
Part #: *BFR-250-8-24
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/4″ Thick x 8″ Wide x 24″ Sheet
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.* Other sheet thicknesses and sizes are available – Please Call.
View Sheet – Black Foam Rubber – 1/4″ Thick x 8″ Wide x 24″ Long PDF
-
Sheet – Black Foam Rubber – 1/2″ Thick x 8″ Wide x 24″ Long
Part #: *BFR-500-8-24
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/2″ Thick x 8″ Wide x 24″ Sheet
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.* Other sheet thicknesses and sizes are available – Please Call.
View Sheet – Black Foam Rubber – 1/2″ Thick x 8″ Wide x 24″ Long PDF
-
Nip Wheel – Rubber Covered
Part #: 1-1897 & 1-5246
For Use With: Scheffer, Global Web Finishing and I-Web equipment.
Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.102″ ID x .750″ Wide
– .475″ bearing ID
– High-quality, double sealed, 6001RS low friction bearing. – Qty 2
– Covered with clear rubber urethane material. -
Shear Slitter Anvil Knife – 5.905″OD
Part #: 5905-400-100-SA
For Use With: Scheffer / Global Web Finishing inline shear slitting station.
Features:
– Premium anvil (bottom) knife.
– 5.905″ OD x 4.00″ ID x 1.00″ Wide
– Split anvil knife (two-halves).
– Three set screws.
– Double edged.Compare to: Scheffer Part# 540059066 or 2-6065
Our anvil knives are manufactured to exacting tolerances from high quality D2 tool steel.
-
Shear Slitter Anvil
Part #: ANV-4138-S
For Use With: Inline shear slitting station.
Features:
– Premium anvil (bottom) knife.
– 4.138″ OD x 3.154″ ID x 1.81″ Wide
– Split anvil knife (two-halves).
– Three set screws.
– Double edged.Our anvil knives are manufactured to exacting tolerances from high quality D2 tool steel.
-
Shear Slitter Anvil Knife – 6.30″ OD
Part #: ANV-630
For Use With: WPM inline shear slitting station.
Features:
– Premium anvil (bottom) knife.
– 6.30″ OD x 4.00″ ID x 1.575″ Wide
– Center locking channel.
– Three set screws.
– Double edged.Walt Powley Inline, Inc. anvil knives are manufactured to exacting tolerances from high quality D2 tool steel.
-
Shear Slitter Anvil
Part #: ANV-T05
For Use With: Inline shear slitting station.
Features:
– Premium anvil (bottom) knife.
– 4.138″ OD x 3.154″ ID x 1.81″ Wide
– Center locking Channel
– Three brass tip set screws.
– Double edged.Our anvil knives are manufactured to exacting tolerances from high quality D2 tool steel.
-
Shear Slitter Anvil Knife – 3.57″ OD
Part #: ANV-W01
For Use With: WPM rotary cutter infeed shear slitter.
Features:
– Premium anvil (bottom) knife.
– 3.57″ OD x 2.36″ ID x 1.00″ Wide
– Center locking channel.
– Double edged.Compare to: WPM Part# 31A
Walt Powley Inline, Inc. anvil knives are manufactured to exacting tolerances from high quality D2 tool steel.
-
Rotary Cutter Infeed Nip Wheel – 1″ Wide
Part #: ATW-100-04
For Use With: WPM rotary cutter air trolley infeed assembly.
Features:
– Standard replacement air trolley wheel.
– 3.00″ OD x 1.575″ ID x 1.00″ Wide
– Manufactured from white delrin material and supplied with high-quality, double sealed, low friction bearings.Compare to: WPM Part# HC-4147
-
Rotary Cutter Indeed Nip Wheel – 1.75″ Wide
Part #: ATW-175-02
For Use With: WPM rotary cutter air trolley infeed assembly.
Features:
– Standard replacement air trolley wheel.
– 3.00″ OD x 1.575″ ID x 1.75″ Wide
– Manufactured from white delrin material and supplied with high-quality, double sealed, low friction bearings.Compare to: WPM Part# HC-5045
-
Rubber Blanket 3 Ply – 24.5″ x 38.5″ x .037″ Thick
Part #: B-4202
For Use With: Rotary Cutter, Knife Block/Knife Cylinder, Anvil Cylinder, and Chip Removal Make-Ready.
Features:
– Gray 3-ply rubber blanket material.
– 24.5″ Wide x 38.5″ Long x .037″ Thick
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.Compare to: Baldwin Part# P360-8018-00
-
Black Foam Rubber – 1/16″ Thick x 1″ Wide x 50 Feet
Part #: BFR-062-1
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/16″ Thick x 1″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 1/16″ Thick x 1″ Wide x 50 Feet PDF
-
Black Foam Rubber – 1/16″ Thick x 12″ Wide x 50 Feet
Part #: BFR-062-12-50
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/16″ Thick x 12″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 1/16″ Thick x 12″ Wide x 50 Feet PDF
-
Black Foam Rubber – 1″ Thick x 12″ Wide x 25 Feet
Part #: BFR-100-12-25
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1″ Thick x 12″ Wide x 25 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder. -
Black Foam Rubber – 1/8″ Thick x 1″ Wide x 50 Feet
Part #: BFR-125-1
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/8″ Thick x 1″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder. -
Black Foam Rubber – 1/8″ Thick x 12″ Wide x 50 Feet
Part #: BFR-125-12-50
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/8″ Thick x 12″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 1/8″ Thick x 12″ Wide x 50 Feet PDF
-
Black Foam Rubber – 1/8″ Thick x 1/2″ Wide x 50 Feet
Part #: BFR-125-50-50
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/8″ Thick x 1/2″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 1/8″ Thick x 1/2″ Wide x 50 Feet PDF
-
Black Foam Rubber – 1/8″ Thick x 5/8″ Wide x 50 Feet
Part #: BFR-125-625
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/8″ Thick x 5/8″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 1/8″ Thick x 5/8″ Wide x 50 Feet PDF
-
Black Foam Rubber – 3/16″ Thick x 1″ Wide x 50 Feet
Part #: BFR-187-1
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 3/16″ Thick x 1″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 3/16″ Thick x 1″ Wide x 50 Feet PDF
-
Black Foam Rubber – 3/16″ Thick x 12″ Wide x 50 Feet
Part #: BFR-187-12-50
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 3/16″ Thick x 12″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 3/16″ Thick x 12″ Wide x 50 Feet PDF
-
Black Foam Rubber – 1/4″ Thick x 1″ Wide x 50 Feet
Part #: BFR-250-1
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/4″ Thick x 1″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder. -
Black Foam Rubber – 1/4″ Thick x 12″ Wide x 50 Feet
Part #: BFR-250-12-50
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/4″ Thick x 12″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 1/4″ Thick x 12″ Wide x 50 Feet PDF
-
Black Foam Rubber – 1/4″ Thick x 1 1/2″ Wide x 50 Feet
Part #: BFR-250-150-50
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/4″ Thick x 1-1/2″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 1/4″ Thick x 1 1/2″ Wide x 50 Feet PDF
-
Black Foam Rubber – 1/4″ Thick x 1/2″ Wide x 50 Feet
Part #: BFR-250-50-50
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/4″ Thick x 1/2″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 1/4″ Thick x 1/2″ Wide x 50 Feet PDF
-
Black Foam Rubber – 1/4″ Thick x 5/8″ Wide x 50 Feet
Part #: BFR-250-625
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/4″ Thick x 5/8″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 1/4″ Thick x 5/8″ Wide x 50 Feet PDF
-
Black Foam Rubber – 1/4″ Thick x 3/4″ Wide x 50 Feet
Part #: BFR-250-750
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/4″ Thick x 3/4″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 1/4″ Thick x 3/4″ Wide x 50 Feet PDF
-
Black Foam Rubber – 3/32″ Thick x 1/2″ Wide x 50 Feet
Part #: BFR-332-50-50
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 3/32″ Thick x 1/2″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 3/32″ Thick x 1/2″ Wide x 50 Feet PDF
-
Black Foam Rubber – 3/8″ Thick x 1″ Wide x 50 Feet
Part #: BFR-375-1
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 3/8″ Thick x 1″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder. -
Black Foam Rubber – 3/8″ Thick x 12″ Wide x 50 Feet
Part #: BFR-375-12-50
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:– 3/8″ Thick x 12″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 3/8″ Thick x 12″ Wide x 50 Feet PDF
-
Black Foam Rubber – 3/8″ Thick x 1 1/2″ Wide x 50 Feet
Part #: BFR-375-150-50
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 3/8″ Thick x 1-1/2″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 3/8″ Thick x 1 1/2″ Wide x 50 Feet PDF
-
Black Foam Rubber – 3/8″ Thick x 5/8″ Wide x 50 Feet
Part #: BFR-375-625
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 3/8″ Thick x 5/8″ Wide x 50 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 3/8″ Thick x 5/8″ Wide x 50 Feet PDF
-
Black Foam Rubber – 1/2″ Thick x 1″ Wide x 25 Feet
Part #: BFR-500-1
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/2″ Thick x 1″ Wide x 25 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder. -
Black Foam Rubber – 1/2″ Thick x 12″ Wide x 25 Feet
Part #: BFR-500-12-25
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/2″ Thick x 12″ Wide x 25 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 1/2″ Thick x 12″ Wide x 25 Feet PDF
-
Black Foam Rubber – 1/2″ Thick x 1 1/2″ Wide x 25 Feet
Part #: BFR-500-150-25
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 1/2″ Thick x 1-1/2″ Wide x 25 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 1/2″ Thick x 1 1/2″ Wide x 25 Feet PDF
-
Black Foam Rubber – 5/8″ Thick x 1″ Wide x 25 Feet
Part #: BFR-625-1
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 5/8″ Thick x 1″ Wide x 25 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder. -
Black Foam Rubber – 5/8″ Thick x 12″ Wide x 25 Feet
Part #: BFR-625-12-25
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 5/8″ Thick x 12″ Wide x 25 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 5/8″ Thick x 12″ Wide x 25 Feet PDF
-
Black Foam Rubber – 7/8″ Thick x 12″ Wide x 25 Feet
Part #: BFR-875-12-25
For Use With: Rotary Cutters, Rotary Die Cutters, Inline, Offline and Cover Production Pressroom Equipment Make-Ready.
Features:
– 7/8″ Thick x 12″ Wide x 25 Foot Roll
– Premium grade foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
– Foam rolls are wound “foam side out” to provide superior attachment to the cylinder.View Black Foam Rubber – 7/8″ Thick x 12″ Wide x 25 Feet PDF
-
Banana Roller – 4″
Part #: BN-4
For Use With: General inline plow folding.
Features:
– Precision machined and supplied with high-quality, double sealed low friction bearings.
– 3/8″-16 threaded mounting end with machined flat to assist operator in mounting to gooseneck. -
Banana Roller – 9″
Part #: BN-9
For Use With: General inline plow folding.
Features:
– Precision machined and supplied with high-quality, double sealed low friction bearings.
– 3/8″-16 threaded mounting end with machined flat to assist operator in mounting to gooseneck. -
Creasing (Score) Ribs
Part #: CR-1032
For Use With: Scheffer / Global Web Finishing inline scoring units.
Features:
– Standard replacement creasing (score) rib.
– Used to score medium to heavy paper stocks.
– Greatly reduces gusseting, cracking, wrinkling and marking on medium to heavy paper stocks.Compare to: Part# M-34
-
Creasing (Score) Ribs
Part #: CR-1034
For Use With: Scheffer / Global Web Finishing inline scoring units.
Features:
– Standard replacement creasing (score) rib.
– Used to score heavy to extra heavy paper stocks.
– Greatly reduces gusseting, cracking, wrinkling and marking on heavy to extra heavy paper stocks.Compare to: Part# M-33
-
Shear Slitter Dish Knife – 3.03″ OD
Part #: DK-1-288
For Use With: Inline shear slitting.
Features:
– Premium male dish knife.
– 3.03″ OD x .866″ ID x .062″ Thick
– Side beveled.Our dish/circular knives are manufactured to exacting tolerances from high quality D2 tool steel and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
Slitter Wheel – 3.03″ OD x .866″ ID – Offset Hub
Part #: DK-1-4303
For Use With: General pressroom slitting applications.
Features:
– Standard replacement slitter wheel.
– 3.03 OD x .866″ ID x .370″ Offset Hub
– One side flat; one side offset hub.Our slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.
We stock a large inventory of pressroom slitter wheels for any application. – Please call!
-
Shear Slitter Dish Knife – 5.118″ OD
Part #: DK-130-100-15
For Use With: Inline shear slitting.
Features:
– Premium male dish knife.
– 5.118″ OD x 3.937″ ID x .059″ Thick with keyway.Our dish/circular knives are manufactured to exacting tolerances from high quality D2 tool steel and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
Shear Slitter Dish Knife – 5.118″ OD
Part #: DK-130-80-14
For Use With: Inline shear slitting.
Features:
– Premium male dish knife.
– 5.118″ OD x 3.149″ ID x .055″ ThickOur dish/circular knives are manufactured to exacting tolerances from high quality D2 tool steel and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
Shear Slitter Dish Knife – 5.905″ OD – Scheffer
Part #: DK-150-80-25
For Use With: Inline shear slitting and WPM & Scheffer / Global Web Finishing inline shear slitting stations.
Features:
– Premium male dish knife.
– 5.905″ OD x 3.149″ ID x .098″ Thick with KeywayCompare to: Scheffer Part# 128216
Our dish/circular knives are manufactured to exacting tolerances from high quality D2 tool steel and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
Shear Slitter Dish Knife – 3.00″ OD
Part #: DK-3000-01
For Use With: Inline shear slitting.
Features:
– Premium male dish knife.
– 3.00″ OD x 1.750″ ID x .067″ Thick with keyway.Our dish/circular knives are manufactured to exacting tolerances from high quality D2 tool steel and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
“Tidland Style” Shear Slitter Dish Knife – 3.543″ OD
Part #: DK-3543-03
Premium “Tidland” style male dish knife for use with inline shear slitting:
– 3.543″ OD x 2.362″ ID x .047″ Thick with Keyway
Our dish/circular knives are manufactured to exacting tolerances from high quality D2 tool steel and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
Shear Slitter Dish Knife – 4.133″ OD
Part #: DK-4133-03
For Use With: Inline shear slitting.
Features:
– Premium male dish knife.
– 4.133″ OD x 2.559″ ID x .047″ Thick with keyway.Our dish/circular knives are manufactured to exacting tolerances from high quality D2 tool steel and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
Shear Slitter Dish Knife – 5.00″ OD – Scheffer
Part #: DK-5000-05
For Use With: Inline shear slitting and Scheffer / Global Web Finishing inline shear slitting stations.
Features:
– Premium male dish knife.
– 5.00″ OD x 2.875″ ID x .059″ ThickCompare to: Scheffer Part# 1-1550
Our dish/circular knives are manufactured to exacting tolerances from high quality D2 tool steel and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
New Style Gooseneck – 18″ Long
Part #: GN-01
Exclusive Walt Powley Inline improved gooseneck design.
Features:
– 18″ Long.
– Single piece ball and spacer assembly.
– 3″ Kant Twist mounting clamp.Advantages:
– Simple hand knob controls gooseneck tension – prevents over tightening and cable breakage.
– Simple hand knob opens and closes mounting clamp for using / changing out plow brushes, banana rollers, glue needles, etc.
– Adjustable clamp for changing gooseneck accessories – NO tools required for use. -
Traditional Style Gooseneck – 22″ Long
Part #: GN-22T-01
22″ long traditional style gooseneck:
Features:
– 3″ Kant Twist mounting clamp.
– 15/16″ hex nut controls gooseneck cable tension.
– Block-End mounting allows for the use of 3/8″ – 16 threaded end plow brushes and banana rollers. -
Traditional Style Gooseneck – 24″ Long
Part #: GN-24T-02
24″ long traditional style gooseneck:
Features:
– 3″ Kant Twist mounting clamp.
– 15/16″ hex nut controls gooseneck cable tension.
– Block-End mounting allows for the use of 3/8″ – 16 threaded end plow brushes and banana rollers. -
Traditional Style Gooseneck – 27″ Long
Part #: GN-27T-03
27″ long traditional style gooseneck:
Features:
– 3″ Kant Twist mounting clamp.
– 15/16″ hex nut controls gooseneck cable tension.
– Block-End mounting allows for the use of 3/8″ – 16 threaded end plow brushes and banana rollers. -
Lock Screw Housing
Part #: GN-3
For Use With: Traditional style goosenecks.
Features:
– Standard replacement lock screw housing.
– Attaches to 3″ can’t twist mounting clamp. -
Lock Screw Housing Mounting Screw
Part #: GN-3-912
For Use With: Traditional style goosenecks.
Features:
– Replacement button head socket cap screw.
– Mounts lock screw housing to twist mounting clamp.
– Two screws needed per assembly. -
3″ Kant Twist Mounting Clamp
Part #: GN-300-C
For Use With: ToolLess style and traditional style goosenecks.
Features:
– Standard replacement 3″ T-Handle mounting clamp.
– Rugged construction.
– Ideal for mounting on side frames or cross bars.
– Opens to 3″ and closes completely. -
Pivot Link
Part #: GN-4
For Use With: Traditional style goosenecks.
Features:
– Standard replacement pivot link. -
Comfort Grip
Part #: GN-400-01
For Use With: ToolLess style and traditional style goosenecks.
Features:
– Fits tightly over T-Handle of standard 3″ mounting clamp.
– Made from high quality, durable plastic.
– Provides a comfortable grip for ease of use.
– Allows operator to apply maximum clamping pressure without use of tools. -
Ball and Sleeve Link
Part #: GN-400-02
For Use With: ToolLess style goosenecks.
Features:
– Standard replacement ball and sleeve link. -
Mounting Nose
Part #: GN-400-03
For Use With: ToolLess style goosenecks.
Features:
– Standard replacement mounting nose.
– Mounting link for metal turn knob. -
Square Coupling
Part #: GN-400-04
For Use With: ToolLess style goosenecks.
Features:
– Standard replacement square coupling.
– Connects to clamp mounting block and turn knob. -
Mounting Block
Part #: GN-400-05
For Use With: ToolLess style goosenecks.
Features:
– Standard replacement mounting block.
– Connects to kant twist mounting clamp. -
Tensioning Knob
Part #: GN-400-06
For Use With: ToolLess style goosenecks.
Features:
– Standard replacement tensioning knob. -
Pivot Ball
Part #: GN-5
For Use With: Traditional style goosenecks.
Features:
– Standard replacement pivot ball. -
Accessory Mount Block
Part #: GN-6
For Use With: Traditional style goosenecks.
Features:
– Standard replacement accessory mount block.
– Mounting block for use with 3/8″ – 16 threaded plow brushes, needle rollers, and banana rollers. -
Cable Clamp Block
Part #: GN-7
For Use With: Traditional style goosenecks.
Features:
– Standard replacement cable clamp block.
– Used in conjunction with accessory mount block. -
Cable Clamp Block Mounting Screw
Part #: GN-7-912
For Use With: Traditional style goosenecks.
Features:
– Replacement socket head cap screw.
– Mounts cable clamp block to accessory mounting block.
– Two screws needed per assembly. -
Lock Screw
Part #: GN-8
For Use With: Traditional style goosenecks.
Features:
– Standard replacement lock screw. -
Lock Nut
Part #: GN-9
For Use With: Traditional style goosenecks.
Features:
– Standard replacement tensioning lock nut.
– For use with lock screw. -
Metal Turn Knob
Part #: GN-C-01
For Use With: ToolLess style goosenecks.
Features:
– Standard replacement turn knob.
– Simple hand knob opens and closes mounting clamp for using / changing out plow brushes, banana rollers, glue needles, etc.
– Turn clockwise to close and tighten. -
Replacement Cable – 18″ ToolLess Style Gooseneck
Part #: GNC-18-01
For Use With: ToolLess style gooseneck.
Features:
– Standard replacement cable for 18″ long ToolLess style gooseneck.
– Premium cable / steel core. -
Replacement Cable – 22″ Traditional Style Gooseneck
Part #: GNC-22-04
For Use With: 22″ traditional style gooseneck.
Features:
– Standard replacement gooseneck cable.
– Properly crimped cable end to prevent breakage.
– Premium cable / steel core.View Replacement Cable – 22″ Traditional Style Gooseneck PDF
-
Replacement Cable – 24″ Traditional Style Gooseneck
Part #: GNC-24-02
For Use With: 24″ traditional style gooseneck.
Features:
– Standard replacement gooseneck cable.
– Properly crimped cable end to prevent breakage.
– Premium cable / steel core.View Replacement Cable – 24″ Traditional Style Gooseneck PDF
-
Replacement Cable – 27″ Traditional Style Gooseneck
Part #: GNC-27-03
For Use With: 27″ traditional style gooseneck.
Features:
– Standard replacement gooseneck cable.
– Properly crimped cable end to prevent breakage.
– Premium cable / steel core.View Replacement Cable – 27″ Traditional Style Gooseneck PDF
-
Grey Glue Pads – 10″ x 32″
Part #: GP-101QV
Premium grade foam rubber glue pad with high quality sticky-back adhesive for applying water based glues and adhesives:
– 10″ Wide x 32″ Long
– .130″ thickWe use the highest quality foam and adhesives to provide the most consistent and trouble free application of water based remoist and seam glues.
Other sheet sizes and custom thicknesses up to 3/16″ available upon request.
-
Tan Glue Pads – 9″ x 24″ – .250″ Thick
Part #: GP-200-250
Premium grade foam rubber glue pad with high quality sticky-back adhesive for applying water based glues and adhesives:
– 9″ Wide x 24″ Long
– .250″ thickWe use the highest quality foam and adhesives to provide the most consistent and trouble free application of water based remoist and seam glues.
-
Tan Glue Pads – 9″ x 24″ – .313″ Thick
Part #: GP-200-313
Premium grade foam rubber glue pad with high quality sticky-back adhesive for applying water based glues and adhesives:
– 9″ Wide x 24″ Long
– .313″ thickWe use the highest quality foam and adhesives to provide the most consistent and trouble free application of water based remoist and seam glues.
-
Tan Glue Pads – 9″ x 24″ – .375″ Thick
Part #: GP-200V
Premium grade foam rubber glue pad with high quality sticky-back adhesive for applying water based glues and adhesives:
– 9″ Wide x 24″ Long
– .375″ thickWe use the highest quality foam and adhesives to provide the most consistent and trouble free application of water based remoist and seam glues.
-
Black Glue Pads – 9″ x 48″
Part #: GP-300-48
Premium grade foam rubber glue pad with high quality sticky-back adhesive for applying solvent based glues and adhesives:
– 9″ Wide x 48″ Long
– .130″ thickWe use the highest quality foam and adhesives to provide the most consistent and trouble free application of solvent based glues.
Other sheet sizes and custom thicknesses up to 3/16″ available upon request.
-
Grey Glue Pads – 9″ x 24″
Part #: GP100
Premium grade foam rubber glue pad with high quality sticky-back adhesive for applying water based glues and adhesives:
– 9″ Wide x 24″ Long
– .130″ thickWe use the highest quality foam and adhesives to provide the most consistent and trouble free application of water based remoist and seam glues.
Other sheet sizes and custom thicknesses up to 3/16″ available upon request.
-
Tan Glue Pads – 9″ x 24″
Part #: GP200
Premium grade foam rubber glue pad with high quality sticky-back adhesive for applying water based glues and adhesives:
– 9″ Wide x 24″ Long
– .130″ thickWe use the highest quality foam and adhesives to provide the most consistent and trouble free application of water based remoist and seam glues.
Other sheet sizes and custom thicknesses up to 3/16″ available upon request.
-
Black Glue Pads – 9″ x 24″
Part #: GP300
Premium grade foam rubber glue pad with high quality sticky-back adhesive for applying solvent based glues and adhesives:
– 9″ Wide x 24″ Long
– .130″ thickWe use the highest quality foam and adhesives to provide the most consistent and trouble free application of solvent based glues.
Other sheet sizes and custom thicknesses up to 3/16″ available upon request.
-
Flex Plate – 9″ x 24″
Part #: GP400
Premium grade closed cell foam rubber glue pad with high quality sticky-back adhesive for applying water based glues, aqueous coatings and UV materials:
– 9″ Wide x 24″ Long
– .130″ thick -
Buna N Pads – 9″ x 24″
Part #: GP500
Custom molded black rubber pads with high quality sticky-back adhesive for applying solvent based scratch-off and micro-encapsulated fragrance materials:
– “Anti-Swell” pads
– 9″ Wide x 24″ Long
– .130″ thickOur GP500 material is specially formulated to prevent swelling and distortion of the pad when applying even the most aggressive solvent based materials.
Custom thicknesses available upon request.
-
Custom Buna N Pads
Part #: GP600
Custom shaped Buna N Pads with high quality sticky-back adhesive for applying solvent based scratch-off and micro-encapsulated fragrance materials:
– “Anti-Swell” pads
– Circles, Squares and Rectangles
– .130″ thickOur GP500 material is specially formulated to prevent swelling and distortion of the pad when applying even the most aggressive solvent based materials.
CLICK HERE TO SEE ALL AVAILABLE CUSTOM BUNA N PADS.
-
1/16″ Dot Plate
Part #: GP700-0625
Custom molded black rubber pads with high quality sticky-back adhesive will reduce your glue usage by 50%:
– 1/16″ Diameter Dot
– 50% Screen
– 11″ Wide x 17″ Long
– .130″ thickGreatly reduces paper curl and glue usage when gluing multiple thickness sheets or cards.
-
3/32″ Dot Plate
Part #: GP700-094
Custom molded black rubber pads with high quality sticky-back adhesive will reduce your glue usage by 60%:
– 3/32″ Diameter Dot
– 60% Screen
– 11″ Wide x 24″ Long
– .130″ thickGreatly reduces paper curl and glue usage when gluing multiple thickness sheets or cards.
-
1/8″ Dot Plate
Part #: GP700-125
Custom molded black rubber pads with high quality sticky-back adhesive will reduce your glue usage by 50%:
– 1/8″ Diameter Dot
– 50% Screen
– 11″ Wide x 21″ Long
– .130″ thickGreatly reduces paper curl and glue usage when gluing multiple thickness sheets or cards.
-
Diamond Plate – Fragrance Pad
Part #: GP800
Custom molded black rubber pads with high quality sticky-back adhesive for applying solvent based micro-encapsulated fragrance materials:
Many different diamond cell sizes and structures available for the application of fragrance – Please contact us!
-
Grip / Anti-Slip / Roller Tape
Part #: GT-100
For Use With: General Pressroom Applications.
This tape provides excellent grip, anti-slip and roller gain. Typically used on support rollers, idler rollers and draw rollers to provide gain and minimize ribbon/web weave.
Features:
– 1″ Wide x 36 Yard Roll
– High strength adhesive that provides superior bond strength and chemical resistance.
– White in color. -
Grip / Anti-Slip / Roller Tape
Part #: GT-200
For Use With: General Pressroom Applications.
This tape provides excellent grip, anti-slip and roller gain. Typically used on support rollers, idler rollers and draw rollers to provide gain and minimize ribbon/web weave.
Features:
– 2″ Wide x 36 Yard Roll
– High strength adhesive that provides superior bond strength and chemical resistance.
– White in color. -
Grip / Anti-Slip / Roller Tape
Part #: GT-400
For Use With: General Pressroom Applications.
This tape provides excellent grip, anti-slip and roller gain. Typically used on support rollers, idler rollers and draw rollers to provide gain and minimize ribbon/web weave.
Features:
– 4″ Wide x 36 Yard Roll
– High strength adhesive that provides superior bond strength and chemical resistance.
– White in color. -
High Density Foam Rubber – 1/16″ Thick x 1″ Wide x 50 Feet
Part #: HDF-062-1-50
For Use With: Rotary Cutters, Rotary Die Cutters, Knife Block/Knife Cylinder and Chip Removal Make-Ready.
Features:
– 1/16″ Thick x 1″ Wide x 50 Foot Roll
– Premium grade high density (closed cell) foam rubber make-ready with high strength adhesive.
– Closed cell / high density foam cell structure.Excellent chip removal packing foam.
View High Density Foam Rubber – 1/16″ Thick x 1″ Wide x 50 Feet PDF
-
High Density Foam Rubber – 1/4″ Thick x 12″ Wide x 50 Feet
Part #: HDF-250-12-50
For Use With: Rotary Cutters, Rotary Die Cutters, Knife Block/Knife Cylinder and Chip Removal Make-Ready.
Features:
– 1/4″ Thick x 12″ Wide x 50 Foot Roll
– Premium grade high density (closed cell) foam rubber make-ready with high strength adhesive.
– Closed cell / high density foam cell structure.Excellent chip removal packing foam.
View High Density Foam Rubber – 1/4″ Thick x 12″ Wide x 50 Feet PDF
-
High Density Foam Rubber – 3/8″ Thick x 12″ Wide x 50 Feet
Part #: HDF-375-12-50
For Use With: Rotary Cutters, Rotary Die Cutters, Knife Block/Knife Cylinder and Chip Removal Make-Ready.
Features:
– 3/8″ Thick x 12″ Wide x 50 Foot Roll
– Premium grade high density (closed cell) foam rubber make-ready with high strength adhesive.
– Closed cell / high density foam cell structure.Excellent chip removal packing foam.
View High Density Foam Rubber – 3/8″ Thick x 12″ Wide x 50 Feet PDF
-
Rotary Cutter Infeed Nip Wheel – Rubber Covered
Part #: M103B788-01
For Use With: Baldwin / Versa Tech / ILF rotary cutters.
Features:
– Replacement rotary cutter infeed nip wheel.
– 4.00″ OD x 3.00″ ID x 1.00″ Wide
– Covered with black, non-marking, rubber urethane material.
– Meets or exceeds OEM specifications.Compare to: Baldwin Part# M103B788-01
-
Micro/Mini Perf Wheels – 2.50″ OD
Part #: Multiple
For Use With: WPM, AGM, Baldwin, ILF, Versa Tech, and Vits:
Features:
– Standard replacement micro/mini perforation wheel.
– 2.50″ OD x 1.25″ ID x .250″ Thick
– 30, 45, 50, 66, 72 Teeth (Cuts) Per Inch available.
– Tie as small as .005″Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
-
Micro/Mini Perf Wheels – 3.03″ OD
Part #: N/A
For Use With: Scheffer, Global Web Finishing & I-Web equipment.
Features:
– Standard replacement micro/mini perforation wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– 30, 45, 50, 66, 72 Teeth (Cuts) Per Inch available.
– Tie as small as .005″Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
-
Needle Roller – 9″
Part #: NR-9
For Use With: General inline plow folding.
Features:
– Precision machined and supplied with high-quality, double sealed low friction bearings.
– 3/8″-16 threaded mounting end with machined flat to assist operator in mounting to gooseneck. -
Hard Plow Brush
Part #: PB-H01
For Use With: General inline plow folding & web/ribbon support.
Features:
– Crimped black nylon bristles.
– Epoxy / Resin filled.
– 3/8″ – 16 threaded mounting end. -
Medium Plow Brush
Part #: PB-M02
For Use With: General inline plow folding & web/ribbon support.
Features:
– Straight white nylon bristles.
– Epoxy / Resin filled.
– 3/8″ – 16 threaded mounting end. -
Soft Plow Brush
Part #: PB-S03
For Use With: General inline plow folding & web/ribbon support.
Features:
– Hog hair bristles.
– Epoxy / Resin filled.
– 3/8″ – 16 threaded mounting end. -
Foam Rubber PVC
Part #: PVC-01
For Use With: Rotary Cutter, Knife Block/Knife Cylinder Make-Ready, Web/Ribbon Control and Building Roller Gain.
Features:
– 3/16″ Thick x 3/8″ Wide x 50 Foot Roll
– Premium grade PVC (grey) foam rubber.
– Premium quality high strength pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.Compare to: Baldwin Part# P361-3010-00
-
Perf Wheel – 2.50″ OD x 10 TPI
Part #: PW-10-250
For Use With: WPM, AGM, Baldwin, ILF, Versa Tech, and Vits equipment:
Features:
– Standard replacement perforation wheel.
– 2.50″ OD x 1.125″ ID x .250″ Thick
– 10 TPI or teeth (cuts) per inch
– Size of cut = .069″
– Size of tie = .031″
– Teeth per wheel = 78Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!
-
Perf Wheel – 3.03″ OD x 10 TPI
Part #: PW-10-303-866
For Use With: Scheffer, Global Web Finishing & I-Web equipment.
Features:
– Standard replacement perforation wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– 10 TPI or teeth (cuts) per inch
– Size of cut = .069″
– Size of tie = .031″
– Teeth per wheel = 95Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!
-
Perf Wheel – 2.50″ OD x 12 TPI
Part #: PW-12-250
For Use With: WPM, AGM, Baldwin, ILF, Versa Tech, and Vits equipment:
Features:
– Standard replacement perforation wheel.
– 2.50″ OD x 1.125″ ID x .250″ Thick
– 12 TPI or teeth (cuts) per inch
– Size of cut = .052″
– Size of tie = .031″
– Teeth per wheel = 95Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!
-
Perf Wheel – 3.03″ OD x 12 TPI
Part #: PW-12-303-866
For Use With: Scheffer, Global Web Finishing & I-Web equipment.
Features:
– Standard replacement perforation wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– 12 TPI or teeth (cuts) per inch
– Size of cut = .052″
– Size of tie = .031″
– Teeth per wheel = 114Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!
-
Perf Wheel – 2.50″ OD x 16 TPI
Part #: PW-16-250
For Use With: WPM, AGM, Baldwin, ILF, Versa Tech, and Vits equipment:
Features:
– Standard replacement perforation wheel.
– 2.50″ OD x 1.125″ ID x .250″ Thick
– 16 TPI or teeth (cuts) per inch
– Size of cut = .031″
– Size of tie = .031″
– Teeth per wheel = 125Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!
-
Perf Wheel – Cameron – 3.03″ OD x 16 TPI
Part #: PW-16-303-866
For Use With: Scheffer, Global Web Finishing & I-Web equipment.
Features:
– Standard Cameron style replacement perforation wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– 16 TPI or teeth (cuts) per inch
– Size of cut = .031″
– Size of tie = .031″
– Teeth per wheel = 152Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!
-
Perf Wheel – 2.50″ OD x 8 TPI
Part #: PW-8-250
For Use With: WPM, AGM, Baldwin, ILF, Versa Tech, and Vits equipment:
Features:
– Standard replacement perforation wheel.
– 2.50″ OD x 1.125″ ID x .250″ Thick
– 8 TPI or teeth (cuts) per inch
– Size of cut = .062″
– Size of tie = .062″
– Teeth per wheel = 63Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!
-
Perf Wheel – Cameron – 3.03″ OD x 8 TPI
Part #: PW-8-303-866
For Use With: Scheffer, Global Web Finishing & I-Web equipment.
Features:
– Standard Cameron style replacement perforation wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– 8 TPI or teeth (cuts) per inch
– Size of cut = .062″
– Size of tie = .062″
– Teeth per wheel = 76Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!
-
Perf Wheel – 3.03″ OD x 1.023″ ID
Part #: PW-XX-DG
For Use With: Didde Graphics equipment.
Features:
– Standard replacement perforation wheel.
– 3.03 OD x 1.023″ ID
– 1.250″ dia. x .6870″ thick offset hub
– One side flat; one side offset hub.Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!
-
2.125″ Diameter Plow Puck
Part #: RP-05
For Use With: Mini rotary plow.
Features:
– Standard replacement plow puck for mini rotary plow.
– 2.125″ diameter plow puck.
– Precision machined and supplied with high-quality, double sealed low friction bearings.
– Single beveled which greatly reduces gusseting, cracking, wrinkling and marking on most paper stocks. -
Mini Rotary Plow
Part #: RP-250-01
For Use With: Mini rotary plow assembly.
Features:
– Standard replacement mini rotary plow.
– 2.50″ diameter knurled support roller prevents air buildup and assists fold.
– 2.125″ diameter rotary plow puck.
– Precision machined from steel and supplied with high-quality, low friction bearings.
– Mounts to mini rotary plow stem with 3/8″ – 16 bolt.
– Available in widths of 4″, 6″, 8″ or other.* Please specify width of rotary plow when ordering.
-
Slitter Wheel – “Full Grind” – 2.50″ OD w/Bearing
Part #: S-007
For Use With: WPM, AGM, Baldwin, ILF, Versa Tech and Vits equipment.
Features:
– Standard replacement slitter wheel.
– 2.50″ OD x 1.125″ ID x .250″ Thick
– Full Grind – No Step
– .500″ bearing ID
– Supplied with a high-quality, double sealed, R8RS low friction bearing installed.Our slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.
We stock a large inventory of pressroom slitter wheels for any application. – Please call!
-
Slitter Wheel – “Full Grind” – 2.50″ OD
Part #: S-007-01
For Use With: WPM, AGM, Baldwin, ILF, Versa Tech and Vits equipment.
Features:
– Standard replacement slitter wheel.
– 2.50″ OD x 1.125″ ID x .250″ Thick
– Full Grind – No StepOur slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.
We stock a large inventory of pressroom slitter wheels for any application. – Please call!
-
Score Wheel – 2.50″ OD
Part #: SC-250-031
For Use With: WPM, AGM, Baldwin, ILF, Versa Tech and Vits equipment.
Features:
– Standard replacement score wheel.
– 2.50″ OD x 1.125″ ID x .250″ Thick
– Score radius = .041″
– Used to reduce gusseting, cracking, wrinkling and marking when plow folding on heavier paper stocks.
– Manufactured to exacting tolerances from premium quality 52100 steel. -
Score Wheel -Cameron – 3.03″ OD x .748″ ID
Part #: SC-303-748-031
For Use With: Scheffer, Global Web Finishing & I-Web equipment.
Features:
– Standard Cameron style replacement score wheel.
– 3.03″ OD x .748″ ID x .244″ Thick
– Score radius = .041″
– Used to reduce gusseting, cracking, wrinkling and marking when plow folding on heavier paper stocks.
– Manufactured to exacting tolerances from premium quality 52100 steel. -
Score Wheel – Cameron – 3.03″ OD x .866″ ID
Part #: SC-303-866-031
For Use With: Scheffer, Global Web Finishing & I-Web equipment.
Features:
– Standard Cameron style replacement score wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– Score radius = .041″
– Used to reduce gusseting, cracking, wrinkling and marking when plow folding on heavier paper stocks.
– Manufactured to exacting tolerances from premium quality 52100 steel. -
Steel Shim Tape
Part #: SH-001T
For Use With: Rotary Cutting and Rotary Die Cutting Applications.
This steel shim tape allows for accurate make ready and fine height adjustments on rotary dies and cutoff knives. Typically used on rotary cutters and rotary die cutters.
Features:
– .001″ Thick x 10 Meter (32.81 ft) Roll
– High strength self-adhesive one side. -
Steel Shim Tape
Part #: SH-002T
For Use With: Rotary Cutting and Rotary Die Cutting Applications.
This steel shim tape allows for accurate make ready and fine height adjustments on rotary dies and cutoff knives. Typically used on rotary cutters and rotary die cutters.
Features:
– .002″ Thick x 10 Meter (32.81 ft) Roll
– High strength self-adhesive one side. -
Steel Shim Tape
Part #: SH-005T
For Use With: Rotary Cutting and Rotary Die Cutting Applications.
This steel shim tape allows for accurate make ready and fine height adjustments on rotary dies and cutoff knives. Typically used on rotary cutters and rotary die cutters.
Features:
– .005″ Thick x 10 Meter (32.81 ft) Roll
– High strength self-adhesive one side. -
30mm Split Trimming Blade
Part #: STB-30
For Use With: Stahl Folders with 25mm ID Shaft Sizes.
Features:
– Premium 30mm ID trimming blade.
– 48mm OD x 30mm ID.
– Split with 2 mounting holes.Our dish/circular trimming blades are manufactured to exacting tolerances and include a specialized cutting edge to maximize blade life and provide superior cut quality.
Compare to Stahl Part# 200-747-01-00
-
40mm Split Trimming Blade
Part #: STB-40
For Use With: Stahl Folders with 35mm ID Shaft Sizes.
Features:
– Premium 40mm ID trimming blade.
– 62.5mm OD x 40mm ID.
– Split with 2 mounting holes.Our dish/circular trimming blades are manufactured to exacting tolerances and include a specialized cutting edge to maximize blade life and provide superior cut quality.
Compare to Stahl Part# 200-747-03-00
-
30mm Solid Trimming Blade
Part #: STB-48
For Use With: Stahl Folders with 25mm ID Shaft Sizes.
Features:
– Premium 30mm ID trimming blade.
– 48mm OD x 30mm ID. x 2mm Thick.
– Solid (non split/no mounting holes).Our dish/circular trimming blades are manufactured to exacting tolerances and include a specialized cutting edge to maximize blade life and provide superior cut quality.
Compare to Stahl Part# 205-970-05-00
-
40mm Solid Trimming Blade
Part #: STB-64
For Use With: Stahl Folders with 35mm ID Shaft Sizes.
Features:
– Premium 40mm ID trimming blade.
– 64mm OD x 40mm ID. x 2mm Thick.
– Solid (non split) with 2 mounting holes.Our dish/circular trimming blades are manufactured to exacting tolerances and include a specialized cutting edge to maximize blade life and provide superior cut quality.
Compare to Stahl Part# 205-970-02-00
-
Slitter Wheel – 2.50″ OD
Part #: SW-01-250
For Use With: WPM, AGM, Baldwin, ILF, Versa Tech and Vits equipment.
Features:
– Standard replacement slitter wheel.
– 2.50″ OD x 1.125″ ID x .250″ ThickOur slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.
We stock a large inventory of pressroom slitter wheels for any application. – Please call!
-
Slitter Wheel – Cameron – 3.03″ OD x .748″ ID
Part #: SW-01-303-748
For Use With: Scheffer, Global Web Finishing and I-Web equipment.
Features:
– Standard Cameron style replacement slitter wheel.
– 3.03″ OD x .748″ ID x .244″ ThickOur slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.
We stock a huge inventory of pressroom slitter wheels for any application. – Please call!
-
Slitter Wheel – Cameron – 3.03″ OD x .866″ ID
Part #: SW-01-303-866
For Use With: Scheffer, Global Web Finishing and I-Web equipment.
Features:
– Standard Cameron style replacement slitter wheel.
– 3.03″ OD x .866″ ID x .244″ ThickOur slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.
We stock a huge inventory of pressroom slitter wheels for any application. – Please call!
-
Slitter Wheel – 3.03″ OD x 1.023″ ID – Offset Hub
Part #: SW-01-303-DG
For Use With: Didde Graphics equipment.
Features:
– Standard replacement slitter wheel.
– 3.03 OD x 1.023″ ID
– 1.250″ dia. x .6870″ thick offset hub
– One side flat; one side offset hub. -
Slitter Wheel – 2.50″ OD w/Bearing
Part #: SWB-01-250
For Use With: WPM, AGM, Baldwin, ILF, Versa Tech and Vits equipment.
Features:
– Standard replacement slitter wheel.
– 2.50″ OD x 1.125″ ID x .250″ Thick
– .500″ bearing ID
– Supplied with a high-quality, double sealed, R8RS low friction bearing installed.Our slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.
We stock a large inventory of pressroom slitter wheels for any application. – Please call!
-
Static Eliminating Tinsel
Part #: T-1250-12
For Use With: General inline finishing and pressroom applications:
– Anti-Static Copper Tinsel Garland.
– 1.25″ diameter x 24 yard roll.
– Solid copper wire center.
– Conducts the static charge from the paper that pass over or under the tinsel.
– Roll can be cut to length easily to fit the application. -
Tesa (Open Cell) Foam Rubber – 1/8″ Thick x 1/2″ Wide x 50 Feet
Part #: TFC-125-50-50
For Use With: Web/Ribbon Control and Building Roller Gain.
Features:
– 1/8″ Thick x 1/2″ Wide x 50 Foot Roll
– Premium grade low density (open cell) foam rubber make-ready with high strength adhesive.
– Charcoal grey in color.
– Open cell / low density foam cell structure.View Tesa (Open Cell) Foam Rubber – 1/8″ Thick x 1/2″ Wide x 50 Feet PDF
-
Tesa (Open Cell) Foam Rubber – 1/4″ Thick x 1/2″ Wide x 50 Feet
Part #: TFC-250-50-50
For Use With: Web/Ribbon Control and Building Roller Gain.
Features:
– 1/4″ Thick x 1/2″ Wide x 50 Foot Roll
– Premium grade low density (open cell) foam rubber make-ready with high strength adhesive.
– Charcoal grey in color.
– Open cell / low density foam cell structure.View Tesa (Open Cell) Foam Rubber – 1/4″ Thick x 1/2″ Wide x 50 Feet PDF
-
Tesa (Open Cell) Foam Rubber – 1/4″ Thick x 6″ Wide x 50 Feet
Part #: TFC-250-600-50
For Use With: Web/Ribbon Control and Building Roller Gain.
Features:
– 1/4″ Thick x 6″ Wide x 50 Foot Roll
– Premium grade low density (open cell) foam rubber make-ready with high strength adhesive.
– Charcoal grey in color.
– Open cell / low density foam cell structure.View Tesa (Open Cell) Foam Rubber – 1/4″ Thick x 6″ Wide x 50 Feet PDF
-
Tesa (Open Cell) Foam Rubber – 1/4″ Thick x 3/4″ Wide x 50 Feet
Part #: TFC-250-750-50
For Use With: Web/Ribbon Control and Building Roller Gain.
Features:
– 1/4″ Thick x 3/4″ Wide x 50 Foot Roll
– Premium grade low density (open cell) foam rubber make-ready with high strength adhesive.
– Charcoal grey in color.
– Open cell / low density foam cell structure.View Tesa (Open Cell) Foam Rubber – 1/4″ Thick x 3/4″ Wide x 50 Feet PDF
-
Tesa (Open Cell) Foam Rubber – 3/8″ Thick x 1/2″ Wide x 50 Feet
Part #: TFC-375-50-25
For Use With: Web/Ribbon Control and Building Roller Gain.
Features:
– 3/8″ Thick x 1/2″ Wide x 25 Foot Roll
– Premium grade low density (open cell) foam rubber make-ready with high strength adhesive.
– Charcoal grey in color.
– Open cell / low density foam cell structure.View Tesa (Open Cell) Foam Rubber – 3/8″ Thick x 1/2″ Wide x 50 Feet PDF
-
Protective / Scoring Tape
Part #: TT-01-18
For Use With: Inline Scoring and General Pressroom Applications.
This tape provides excellent wear resistance and protection against abrasion and scratching on all metal surfaces. Typically used on support rollers, idler rollers, draw rollers, rotary plows, plow shoes, and angle bars. Additional uses include enhancing the quality of inline scoring by wrapping the draw roller below a scoring wheel to create a “channeled” scoring matrix.
Features:
– 1″ Wide x .010″ Thick x 18 Yard Roll
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength and chemical resistance but easy cleanup.
– Translucent in color with blue adhesive release backing. -
Protective / Scoring Tape
Part #: TT-01G-036
For Use With: Inline Scoring and General Pressroom Applications.
This tape provides excellent wear resistance and protection against abrasion and scratching on all metal surfaces. Typically used on support rollers, idler rollers, draw rollers, rotary plows, plow shoes, and angle bars. Additional uses include enhancing the quality of inline scoring by wrapping the draw roller below a scoring wheel to create a “channeled” scoring matrix.
Features:
– 1″ Wide x .005″ Thick x 36 Yard Roll
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength and chemical resistance but easy cleanup.
– Translucent in color with tan adhesive release backing. -
Protective / Scoring Tape
Part #: TT-02-18
For Use With: Inline Scoring and General Pressroom Applications.
This tape provides excellent wear resistance and protection against abrasion and scratching on all metal surfaces. Typically used on support rollers, idler rollers, draw rollers, rotary plows, plow shoes, and angle bars. Additional uses include enhancing the quality of inline scoring by wrapping the draw roller below a scoring wheel to create a “channeled” scoring matrix.
Features:
– 2″ Wide x .010″ Thick x 18 Yard Roll
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength and chemical resistance but easy cleanup.
– Translucent in color with blue adhesive release backing. -
Protective / Scoring Tape
Part #: TT-03-18
For Use With: Inline Scoring and General Pressroom Applications.
This tape provides excellent wear resistance and protection against abrasion and scratching on all metal surfaces. Typically used on support rollers, idler rollers, draw rollers, rotary plows, plow shoes, and angle bars. Additional uses include enhancing the quality of inline scoring by wrapping the draw roller below a scoring wheel to create a “channeled” scoring matrix.
Features:
– 3″ Wide x .010″ Thick x 18 Yard Roll
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength and chemical resistance but easy cleanup.
– Translucent in color with blue adhesive release backing. -
Protective / Scoring Tape
Part #: TT-04-18
For Use With: Inline Scoring and General Pressroom Applications.
This tape provides excellent wear resistance and protection against abrasion and scratching on all metal surfaces. Typically used on support rollers, idler rollers, draw rollers, rotary plows, plow shoes, and angle bars. Additional uses include enhancing the quality of inline scoring by wrapping the draw roller below a scoring wheel to create a “channeled” scoring matrix.
Features:
– 4″ Wide x .010″ Thick x 18 Yard Roll
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength and chemical resistance but easy cleanup.
– Translucent in color with blue adhesive release backing. -
Scoring Tape
Part #: TT-05-18
For Use With: Inline Scoring and General Pressroom Applications.
Scoring tape can be used to enhance the quality of inline scoring by wrapping the draw roller below a scoring wheel to create a “channeled” scoring matrix. Used to reduce gusseting, cracking, wrinkling and marking when plow folding on heavier paper stocks.
Features:
– 5″ Wide x .010″ Thick x 18 Yard Roll
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength and chemical resistance but easy cleanup.
– Translucent in color with blue adhesive release backing. -
Protective / Scoring Tape
Part #: TT-250-18
For Use With: Inline Scoring and General Pressroom Applications.
This tape provides excellent wear resistance and protection against abrasion and scratching on all metal surfaces. Typically used on support rollers, idler rollers, draw rollers, rotary plows, plow shoes, and angle bars. Additional uses include enhancing the quality of inline scoring by wrapping the draw roller below a scoring wheel to create a “channeled” scoring matrix.
Features:
– 1/4″ Wide x .010″ Thick x 18 Yard Roll
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength and chemical resistance but easy cleanup.
– Translucent in color with blue adhesive release backing. -
Protective / Scoring Tape
Part #: TT-500-18
For Use With: Inline Scoring and General Pressroom Applications.
This tape provides excellent wear resistance and protection against abrasion and scratching on all metal surfaces. Typically used on support rollers, idler rollers, draw rollers, rotary plows, plow shoes, and angle bars. Additional uses include enhancing the quality of inline scoring by wrapping the draw roller below a scoring wheel to create a “channeled” scoring matrix.
Features:
– 1/2″ Wide x .010″ Thick x 18 Yard Roll
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength and chemical resistance but easy cleanup.
– Translucent in color with blue adhesive release backing. -
Protective / Scoring Tape
Part #: TT-750-18
For Use With: Inline Scoring and General Pressroom Applications.
This tape provides excellent wear resistance and protection against abrasion and scratching on all metal surfaces. Typically used on support rollers, idler rollers, draw rollers, rotary plows, plow shoes, and angle bars. Additional uses include enhancing the quality of inline scoring by wrapping the draw roller below a scoring wheel to create a “channeled” scoring matrix.
Features:
– 3/4″ Wide x .010″ Thick x 18 Yard Roll
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength and chemical resistance but easy cleanup.
– Translucent in color with blue adhesive release backing. -
Nip Wheel – White Delrin – 2.50″ OD
Part #: TW-250-1-W
For Use With: Vits air trolley wheel assemblies and WPM/AGM single wheel air trolley assemblies.
Features:
– Standard replacement air trolley wheel.
– 2.50″ OD x 1.25″ ID x .9375″ Wide
– .475″ bearing ID
– Manufactured from delrin and supplied with high-quality, double sealed, 6201 low friction bearings. – Qty 2
– Meets or exceeds OEM specifications. -
Nip Wheel – Red Polyurethane – 2.50″ OD
Part #: TW-250-2-RU
For Use With: Vits air trolley wheel assemblies and WPM single wheel air trolley assemblies.
Features:
– Standard replacement air trolley wheel.
– 2.50″ OD x 1.25″ ID x .9375″ Wide
– .475″ bearing ID
– Manufactured from red polyurethane and supplied with high-quality, double sealed, 6201 low friction bearings. – Qty 2
– Meets or exceeds OEM specifications. -
Nip Wheel – Blue Urethane – 2.50″ OD
Part #: TW-250-4-P
For Use With: Vits air trolley wheel assemblies and WPM single wheel air trolley assemblies.
Features:
– Standard replacement air trolley wheel.
– 2.50″ OD x 1.25″ ID x .9375″ Wide
– .475″ bearing ID
– Manufactured from blue urethane and supplied with high-quality, double sealed, 6201 low friction bearings. – Qty 2
– Meets or exceeds OEM specifications. -
Recovered Nip Wheel – Blue Urethane – 2.50″ OD
Part #: TW-250-OR
For Use With: Vits air trolley wheel assemblies and WPM single wheel air trolley assemblies.
Ship us your existing worn nip wheels and our recovering service will remove and replace the covering and bearings. NO MINIMUMS
Features:
– Allows reuse of nip wheels
– New blue urethane covering and new set of bearings
– Standard replacement air trolley wheel.
– 2.50″ OD x 1.25″ ID x .9375″ Wide
– .475″ bearing ID
– Manufactured from blue urethane and supplied with high-quality, double sealed, 6201 low friction bearings. – Qty 2
– Meets or exceeds OEM specifications. -
Nip Wheel – Red Urethane – 2.50″ OD
Part #: TW-250-V
For Use With: Vits air trolley assemblies.
Features:
– Standard replacement trolley wheel.
– 2.50″ OD x 1.50″ ID x 1.250″ Wide
– .475″ bearing ID
– Manufactured from red urethane and supplied with high-quality, double sealed, 1614Z low friction bearings- Qty 2
– Meets or exceeds OEM specifications. -
Recovered Nip Wheel – Red Urethane – 2.50″ OD
Part #: TW-250-V-OR
For Use With: Vits air trolley assemblies.
Ship us your existing worn nip wheels and our recovering service will remove and replace the covering and bearings.
Features:
– Allows reuse of nip wheels
– New red urethane covering and new set of bearings
– Standard replacement trolley wheel.
– 2.50″ OD x 1.50″ ID x 1.250″ Wide
– .475″ bearing ID
– Manufactured from red urethane and supplied with high-quality, double sealed, 1614Z low friction bearings- Qty 2
– Meets or exceeds OEM specifications. -
Nip Wheel – Red Polyurethane – 2.50″ OD
Part #: TW-250R-01
For Use With: WPM, AGM, Baldwin, ILF and Versa Tech equipment.
Features:
– Standard replacement air trolley wheel.
– 2.50″ OD x 1.125″ ID x .500″ Wide
– .500″ bearing ID
– Manufactured from polyurethane and supplied with a high-quality, double sealed, R8RS low friction bearing.
– Meets or exceeds OEM specifications.Compare to: WPM Part# 9024B
-
Nip Wheel – White Delrin – 2.50″ OD
Part #: TW-250W-02
For Use With: WPM, AGM, Baldwin, ILF and Versa Tech equipment.
Features:
– Standard replacement air trolley wheel.
– 2.50″ OD x 1.125″ ID x .500″ Wide
– .500″ bearing ID
– Manufactured from delrin and supplied with a high-quality, double sealed, R8RS low friction bearing.
– Meets or exceeds OEM specifications. -
Nip Wheel – Yellow Polyurethane – 2.50″ OD
Part #: TW-250Y-03
For Use With: WPM, AGM, Baldwin, ILF, Versa Tech and Gregg equipment.
Features:
– Standard replacement air trolley wheel.
– 2.50″ OD x 1.125″ ID x .500″ Wide
– .500″ bearing ID
– Manufactured from polyurethane and supplied with a high-quality, double sealed, R8RS low friction bearing.
– Meets or exceeds OEM specifications. -
Nip Wheel – White Delrin – 3.00″ OD
Part #: TW-300W-03
For Use With: Scheffer / Global Web Finishing, I-Web and Spec equipment.
Features:
– Standard replacement air trolley wheel.
– 3.00″ OD x 1.125″ ID x .875″ Wide
– .500″ bearing ID
– Manufactured from delrin and supplied with high-quality, double sealed, R8RS low friction bearings. – Qty 2
– Meets or exceeds OEM specifications. -
Nip Wheel – White Delrin – 3.00″ OD
Part #: TW-300W-04
For Use With: Scheffer / Global Web Finishing, I-Web and Spec equipment.
Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.375″ ID x 1.00″ Wide
– .625″ bearing ID
– Manufactured from delrin and supplied with high-quality, double sealed, 1623RS low friction bearings -Qty 2
– Meets or exceeds OEM specifications. -
Nip Wheel – White Delrin – 3.00″ OD
Part #: TW-300W-07
For Use With: Scheffer / Global Web Finishing, I-Web and Spec equipment.
Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.102″ ID x .9375″ Wide
– .475″ bearing ID
– Manufactured from delrin and supplied with high-quality, double sealed, 6001RS low friction bearings -Qty 2
– Meets or exceeds OEM specifications. -
Nip Wheel – White Delrin – 3.00″ OD
Part #: TW-300W-08-JO
For use with I-Web equipment.
Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.862″ ID x 1.00″ Wide
– Manufactured from delrin.
– Meets or exceeds OEM standards. -
Nip Wheel – White Delrin – 3.04″ OD
Part #: TW-304W-01
For use with Scheffer, Global Web Finishing and I-Web equipment.
Features:
– Replacement air trolley wheel.
– 3.04″ OD x 1.374″ ID x 1.117″ wide
– Manufactured from delrin.
– Meets or exceeds OEM standards. -
Nip Wheel – White Delrin – 3.00″ OD
Part #: TW-3125W-04
For Use With: Scheffer / Global Web Finishing, I-Web and Spec equipment.
Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.60″ ID x 1.00″ Wide
– .866″ Bore – No Bearings
– Manufactured from delrin.
– Meets or exceeds OEM specifications. -
Nip Wheel – White Delrin – 3.00″ OD
Part #: TW-3125W-04-750
For Use With: Scheffer, Global Web Finishing and I-Web equipment.
Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.60″ ID x 1.00″ Wide
– .748″ Bore – No Bearings
– Manufactured from delrin.
– Meets or exceeds OEM specifications. -
Nip Wheel – Rubber Covered
Part #: TW-3150G-01-748
For Use With: Scheffer, Global Web Finishing, and I-Web equipment.
Features:
– Replacement air trolley wheel.
– 3.150″ OD x 1.70″ ID x .675″ Wide
– .748″ Bore – No Bearings
– Covered with green, non-marking, rubber urethane material.
– Meets or exceeds OEM specifications. -
Nip Wheel – Rubber Covered
Part #: TW-3150G-01-866
For Use With: Scheffer, Global Web Finishing, and I-Web equipment.
Features:
– Replacement air trolley wheel.
– 3.150″ OD x 1.70″ ID x .675″ Wide
– .866″ Bore – No Bearings
– Covered with green, non-marking, rubber urethane material.
– Meets or exceeds OEM specifications. -
Velcro Brand Hook Tape – 1″ Wide
Part #: VHT-100-03
For Use With: General Pressroom Applications.
Features:
– 1″ Wide x 25 Yard Roll
– Premium grade Velcro Brand Hook Tape – “Plastic Hook” Side.
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup. -
Velcro Brand Hook Tape – 2″ Wide
Part #: VHT-200-04
For Use With: General Pressroom Applications.
Features:
– 2″ Wide x 25 Yard Roll
– Premium grade Velcro Brand Hook Tape – “Plastic Hook” Side.
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup. -
Velcro Brand Hook Tape – 4″ Wide
Part #: VHT-400-05
For Use With: General Pressroom Applications.
Features:
– 4″ Wide x 25 Yard Roll
– Premium grade Velcro Brand Hook Tape – “Plastic Hook” Side.
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup. -
Velcro Brand Hook Tape – 1/2″ Wide
Part #: VHT-500-01
For Use With: General Pressroom Applications.
Features:
– 1/2″ Wide x 25 Yard Roll
– Premium grade Velcro Brand Hook Tape – “Plastic Hook” Side.
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup. -
Velcro Brand Hook Tape – 5/8″ Wide
Part #: VHT-625-02
For Use With: General Pressroom Applications.
Features:
– 5/8″ Wide x 25 Yard Roll
– Premium grade Velcro Brand Hook Tape – “Plastic Hook” Side.
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup. -
Velcro Brand Loop Tape – 1″ Wide
Part #: VLT-100
For Use With: Rotary Cutter, Knife Block/Knife Cylinder, Anvil Cylinder Make-Ready, Web/Ribbon Control and Building Roller Gain.
Features:
– 1″ Wide x 25 Yard Roll
– Premium grade Velcro Brand Loop Tape – “Felt” Side.
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup. -
Velcro Brand Loop Tape – 1 1/2″ Wide
Part #: VLT-150
For Use With: Rotary Cutter, Knife Block/Knife Cylinder, Anvil Cylinder Make-Ready, Web/Ribbon Control and Building Roller Gain.
Features:
– 1 1/2″ Wide x 25 Yard Roll
– Premium grade Velcro Brand Loop Tape – “Felt” Side.
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup. -
Velcro Brand Loop Tape – 2″ Wide
Part #: VLT-200
For Use With: Rotary Cutter, Knife Block/Knife Cylinder, Anvil Cylinder Make-Ready, Web/Ribbon Control and Building Roller Gain.
Features:
– 2″ Wide x 25 Yard Roll
– Premium grade Velcro Brand Loop Tape – “Felt” Side.
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup. -
Velcro Brand Loop Tape – 1/4″ Wide
Part #: VLT-250
For Use With: Rotary Cutter, Knife Block/Knife Cylinder, Anvil Cylinder Make-Ready, Web/Ribbon Control and Building Roller Gain.
Features:
– 1/4″ Wide x 25 Yard Roll
– Premium grade Velcro Brand Loop Tape – “Felt” Side.
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup. -
Velcro Brand Loop Tape – 3″ Wide
Part #: VLT-300
For Use With: Rotary Cutter, Knife Block/Knife Cylinder, Anvil Cylinder Make-Ready, Web/Ribbon Control and Building Roller Gain.
Features:
– 3″ Wide x 25 Yard Roll
– Premium grade Velcro Brand Loop Tape – “Felt” Side.
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup. -
Velcro Brand Loop Tape – 3/8″ Wide
Part #: VLT-375
For Use With: Rotary Cutter, Knife Block/Knife Cylinder, Anvil Cylinder Make-Ready, Web/Ribbon Control and Building Roller Gain.
Features:
– 3/8″ Wide x 25 Yard Roll
– Premium grade Velcro Brand Loop Tape – “Felt” Side.
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup. -
Velcro Brand Loop Tape – 4″ Wide
Part #: VLT-400
For Use With: Rotary Cutter, Knife Block/Knife Cylinder, Anvil Cylinder Make-Ready, Web/Ribbon Control and Building Roller Gain.
Features:
– 4″ Wide x 25 Yard Roll
– Premium grade Velcro Brand Loop Tape – “Felt” Side.
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup. -
Velcro Brand Loop Tape – 1/2″ Wide
Part #: VLT-500
For Use With: Rotary Cutter, Knife Block/Knife Cylinder, Anvil Cylinder Make-Ready, Web/Ribbon Control and Building Roller Gain.
Features:
– 1/2″ Wide x 25 Yard Roll
– Premium grade Velcro Brand Loop Tape – “Felt” Side.
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup. -
Velcro Brand Loop Tape – 5/8″ Wide
Part #: VLT-625
For Use With: Rotary Cutter, Knife Block/Knife Cylinder, Anvil Cylinder Make-Ready, Web/Ribbon Control and Building Roller Gain.
Features:
– 5/8″ Wide x 25 Yard Roll
– Premium grade Velcro Brand Loop Tape – “Felt” Side.
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup. -
Velcro Brand Loop Tape – 3/4″ Wide
Part #: VLT-750
For Use With: Rotary Cutter, Knife Block/Knife Cylinder, Anvil Cylinder Make-Ready, Web/Ribbon Control and Building Roller Gain.
Features:
– 3/4″ Wide x 25 Yard Roll
– Premium grade Velcro Brand Loop Tape – “Felt” Side.
– High strength acrylic pressure sensitive adhesive (PSA) that provides superior bond strength but easy cleanup.
Part not listed?
We are experts at sourcing and manufacturing spare parts and consumables. We are confident that we can find or manufacture you the parts your operation needs!