WPM / AGM
Home › Parts Shop › WPM / AGM
-
Shear Slitter Anvil Knife – 6.30″ OD
Part #: ANV-630
Add to QuoteFor Use With: WPM inline shear slitting station.
Features:
– Premium anvil (bottom) knife.
– 6.30″ OD x 4.00″ ID x 1.575″ Wide
– Center locking channel.
– Three set screws.
– Double edged.Walt Powley Inline, Inc. anvil knives are manufactured to exacting tolerances from high quality D2 tool steel.
-
Shear Slitter Anvil Knife – 3.57″ OD
Part #: ANV-W01
Add to QuoteFor Use With: WPM rotary cutter infeed shear slitter.
Features:
– Premium anvil (bottom) knife.
– 3.57″ OD x 2.36″ ID x 1.00″ Wide
– Center locking channel.
– Double edged.Compare to: WPM Part# 31A
Walt Powley Inline, Inc. anvil knives are manufactured to exacting tolerances from high quality D2 tool steel.
-
Complete Infeed Air Trolley Assembly – 1″ Wide Wheel
Part #: AT-100-Y
Add to QuoteFor Use With: WPM rotary cutters.
Features:
– Standard air trolley infeed nip wheel assembly.
– Includes 1″ wide white delrin nip wheel with high-quality, double sealed, low friction bearings.
– Solid / durable construction.Compare to: WPM Part# B35552
View Complete Infeed Air Trolley Assembly – 1″ Wide Wheel PDF
-
Rubber Diaphragm – Cap
Part #: AT-100R
Add to QuoteFor Use With: WPM rotary cutter air trolley infeed assembly.
Features:
– Standard replacement rubber diaphragm (cap).
– Fits in cylinder body.Compare to: WPM Part# HC-4198
-
Brass Bushing
Part #: AT-102B
Add to QuoteFor Use With: WPM rotary cutter air trolley infeed assembly.
Features:
– Standard replacement brass bushing. -
Plunger Cap
Part #: AT-103P
Add to QuoteFor Use With: WPM rotary cutter air trolley infeed assembly.
Features:
– Standard replacement plunger cap. -
Piston
Part #: AT-104C
Add to QuoteFor Use With: WPM rotary cutter air trolley infeed assembly.
Features:
– Standard replacement piston.
– Fits in plunger cap. -
Cylinder Body
Part #: AT-105-01
Add to QuoteFor Use With: WPM rotary cutter air trolley infeed assembly.
Features:
– Standard replacement cylinder body. -
Spring
Part #: AT-107S
Add to QuoteFor Use With: WPM rotary cutter air trolley infeed assembly.
Features:
– Standard replacement spring.
– Fits over piston. -
Nip Wheel Caps
Part #: AT-109C
Add to QuoteFor Use With: WPM rotary cutter air trolley infeed assembly.
Features:
– Standard replacement nip wheel caps.
– Fits in bearings of air trolley nip wheels. -
Complete Infeed Air Trolley Assembly – 1-3/4″ Wide Wheel
Part #: AT-175-Y
Add to QuoteFor Use With: WPM rotary cutters.
Features:
– Standard air trolley infeed nip wheel assembly.
– Includes 1-3/4″ wide white delrin nip wheel with high-quality, double sealed, low friction bearings.
– Solid / durable construction.Compare to: WPM Part# B68346
View Complete Infeed Air Trolley Assembly – 1-3/4″ Wide Wheel PDF
-
1″ Wide Wheel with Bearings and Yoke
Part #: ATW-100-03
Add to QuoteFor Use With: WPM rotary cutter air trolley infeed assembly.
Features:
– Standard replacement yoke housing and 1″ wide air trolley nip wheel.
– Includes 1″ wide white delrin nip wheel with high-quality, double sealed, low friction bearings.
– Solid / durable construction.Compare to: WPM Part# HC-3218
-
Rotary Cutter Infeed Nip Wheel – 1″ Wide
Part #: ATW-100-04
Add to QuoteFor Use With: WPM rotary cutter air trolley infeed assembly.
Features:
– Standard replacement air trolley wheel.
– 3.00″ OD x 1.575″ ID x 1.00″ Wide
– Manufactured from white delrin material and supplied with high-quality, double sealed, low friction bearings.Compare to: WPM Part# HC-4147
-
1″ Wide Yoke
Part #: ATW-100-05
Add to QuoteFor Use With: WPM rotary cutter air trolley infeed assembly.
Features:
– Standard replacement yoke housing for 1″ wide air trolley wheel.
– Solid / durable construction.Compare to: WPM Part# HC-5039
-
1-3/4″ Wide Wheel with Bearings and Yoke
Part #: ATW-175-01
Add to QuoteFor Use With: WPM rotary cutter air trolley infeed assembly.
Features:
– Standard replacement yoke housing and 1-3/4″ wide air trolley nip wheel.
– Includes 1-3/4″ wide white delrin nip wheel with high-quality, double sealed, low friction bearing.
– Solid / durable construction.Compare to: WPM Part# HC-5218
-
Rotary Cutter Indeed Nip Wheel – 1.75″ Wide
Part #: ATW-175-02
Add to QuoteFor Use With: WPM rotary cutter air trolley infeed assembly.
Features:
– Standard replacement air trolley wheel.
– 3.00″ OD x 1.575″ ID x 1.75″ Wide
– Manufactured from white delrin material and supplied with high-quality, double sealed, low friction bearings.Compare to: WPM Part# HC-5045
-
1-3/4″ Wide Yoke
Part #: ATY-175-02
Add to QuoteFor Use With: WPM rotary cutter air trolley infeed assembly.
Features:
– Standard replacement yoke housing for 1-3/4″ wide air trolley wheel.
– Solid / durable construction.Compare to: WPM Part# HC-5040
-
Internal Bearing
Part #: BB-50036
Add to QuoteFor Use With: Vits and WPM / AGM rotary plows – 4.187″ diameter.
Features:
– Double rubber sealed low friction bearing that meets or exceeds OEM specifications. -
Bearing Spacer
Part #: BS-50036
Add to QuoteFor Use With: Vits and WPM / AGM rotary plows – 4.187″ diameter.
Features:
– Positioned between the rotary plow puck and internal mounting bracket. -
3/8″ Die Clamp
Part #: DC-375-02
Add to QuoteFor Use With: WPM, or other manufacture, rotary cutters and die cutters.
Features:
– Standard replacement die clamp for mounting molded cutoff knives and dies.
– Used for mounting 3/8″ high (undercut) molded cutoff knives and dies.
– Die clamp only.
– Bag of 100Compare to: WPM Part # B23054
-
3/8″ Die Clamp Assemblies
Part #: DCA-375-01
Add to QuoteFor Use With: WPM, or other manufacture, rotary cutters and die cutters.
Features:
– Standard replacement die clamp assemblies for mounting molded cutoff knives and dies.
– Used for mounting 3/8″ high (undercut) molded cutoff knives and dies.
– Includes 3/8″ torx screw, clamp and fiber washer.
– Bag of 100Compare to: WPM Part # B23054-A25618
-
Shear Slitter Dish Knife – 5.905″ OD – Scheffer
Part #: DK-150-80-25
Add to QuoteFor Use With: Inline shear slitting and WPM & Scheffer / Global Web Finishing inline shear slitting stations.
Features:
– Premium male dish knife.
– 5.905″ OD x 3.149″ ID x .098″ Thick with KeywayCompare to: Scheffer Part# 128216
Our dish/circular knives are manufactured to exacting tolerances from high quality D2 tool steel and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
Shear Slitter Dish Knife – 4.133″ OD – WPM
Part #: DK-4133-04
Add to QuoteFor Use With: WPM rotary cutter infeed shear slitter.
Features:
– Premium dish knife.
– 4.133″ OD x 2.952″ ID x .047″ Thick with keyway.Compare to: WPM Part# 02668
Walt Powley Inline, Inc. dish/circular knives are manufactured to exacting tolerances from high quality D2 tool steel and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
Air Trolley Assembly (Double Wheel)
Part #: DW-250-01A
Add to QuoteFor Use With: WPM/AGM angle bars, seam gluers, prefolders, pattern perforators, and plow towers.
Features:
– Standard double wheel air trolley assembly.
– Complete assembly includes; air cylinder, male elbow swivel, male hex nipple, sleeve valve, mounting hardware and two red polyurethane nip wheels.
– Manufactured to meet or exceed OEM specifications.Compare to: WPM Part# C50034
-
Axle
Part #: DW-250A-03
Add to QuoteFor Use With: Air trolley (double wheel) assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement nip wheel mounting axle. -
Mounting Body
Part #: DW-250B-05
Add to QuoteFor Use With: Air trolley (double wheel) assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement mounting body. -
Mounting Axle Pin
Part #: DW-250P-04
Add to QuoteFor Use With: Air trolley (double wheel) assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement mounting axle pin. -
Snap Rings
Part #: DW-250R-06
Add to QuoteFor Use With:
- Vits and WPM/AGM air trolley slitter conversion kits on angle bars, seam gluers, prefolders, pattern perforators, and plow towers.
- WPM/AGM Air trolley (double wheel) assemblies.
Features:
– Replacement snap ring for use with modified axle.
– Two snap rings needed per slitter conversion assembly.
– Four rings needed per double nip wheel assembly. -
Yoke
Part #: DW-250Y-02
Add to QuoteFor Use With: Air trolley (double wheel) assemblies on WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement yoke. -
Fiber Washer
Part #: FW-01
Add to QuoteFor Use With: WPM, or other manufacture, rotary cutters and die cutters.
Features:
– Standard replacement red fiber washer for die clamp assemblies. -
Glue Skiver – WPM/AGM
Part #: GS-001
Add to QuoteFor Use With: WPM and AGM Remoist and Seam (Wet) Gluers:
Features:
– Standard 4″ replacement glue skiver/wiper.
– Assists in preventing glue slinging/spitting.
– Reduces gluer cleanup.Compare to: WPM Part# B51036
-
Glue Skiver – WPM/AGM Portable Flex Gluers
Part #: GS-002F
Add to QuoteFor Use With: WPM and AGM Portable Flex Gluers:
Features:
– Standard 2″ replacement glue skiver/wiper.
– Assists in preventing glue slinging/spitting.
– Reduces gluer cleanup.Compare to: WPM Part# A50873
-
Internal Plow Puck Mounting Bracket
Part #: H-50036
Add to QuoteFor Use With: Vits and WPM / AGM rotary plows – 4.187″ diameter.
Features:
– Replacement internal housing bracket to mount rotary plow puck. -
S-Connector
Part #: L-4187-01
Add to QuoteFor Use With: Vits and WPM/AGM plow folding equipment – 4.187″ diameter.
Features:
– Connects plow linkage rod to actuating shaft.
– Precision machined to meet or exceed OEM specifications. -
Shoulder Mounting Bolt
Part #: MB-50036
Add to QuoteFor Use With: Vits and WPM / AGM rotary plows – 4.187″ diameter.
Features:
– Used to mount plow puck to rotary plow assembly. -
“TNT” Coated Die Rule Cutting Blade – .376″ High x 10″ Long – Oval Hole
Part #: MCB-375-10-01
Add to QuoteFor Use With: WPM, or other manufacture, rotary cutters and die cutters.
Features:
– 10″ Long x .376″ High with 9 oval mounting holes.
– Premium replacement die rule cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
– Manufactured to exceed OEM specifications.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with WPM rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!
View “TNT” Coated Die Rule Cutting Blade – .376″ High x 10″ Long – Oval Hole PDF
-
“TNT” Coated Die Rule Cutting Blade – .376″ High x 13.375″ Long – Notched
Part #: MCB-375-13-03
Add to QuoteFor Use With: WPM, or other manufacture, rotary cutters and die cutters.
Features:
– 13.375″ Long x .376″ High with 7 notches.
– Premium replacement die rule cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
– Manufactured to exceed OEM specifications.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with WPM rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!
View “TNT” Coated Die Rule Cutting Blade – .376″ High x 13.375″ Long – Notched PDF
-
“TNT” Coated Die Rule Cutting Blade – .376″ High x 21″ Long – Oval Hole
Part #: MCB-375-21-02
Add to QuoteFor Use With: WPM, or other manufacture, rotary cutters and die cutters.
Features:
– 21″ Long x .376″ High with 19 oval mounting holes.
– Premium replacement die rule cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
– Manufactured to exceed OEM specifications.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with WPM rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!
View “TNT” Coated Die Rule Cutting Blade – .376″ High x 21″ Long – Oval Hole PDF
-
“TNT” Coated Die Rule Cutting Blade – .625″ High x 13.375″ Long – Notched
Part #: MCB-625-13-01
Add to QuoteFor Use With: WPM, or other manufacture, rotary cutters and die cutters.
Features:
– 13.375″ Long x .625″ High with 12 Notches.
– Premium replacement die rule cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
– Manufactured to exceed OEM specifications.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with WPM rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!
View “TNT” Coated Die Rule Cutting Blade – .625″ High x 13.375″ Long – Notched PDF
-
Heavy Duty “TNT” Coated Cutting Blade – .625″ High x 13.375″ Long – Notched
Part #: MCB-625-1350-4
Add to QuoteExclusive Walt Powley Inline heavy duty replacement cutting blade for use with WPM, or other manufacture, rotary cutters and die cutters.
Features:
– 13.375″ Long x .625″ High with 12 Notches.
– Heavy duty (thick) replacement cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
– Manufactured to exceed OEM specifications.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with WPM rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!
View Heavy Duty “TNT” Coated Cutting Blade – .625″ High x 13.375″ Long – Notched PDF
-
“TNT” Coated Die Rule Cutting Blade – .625″ High x 26.750″ Long – Notched
Part #: MCB-625-26-02
Add to QuoteFor Use With: WPM, or other manufacture, rotary cutters and die cutters.
Features:
– 26.750″ Long x .625″ High with 24 Notches.
– Premium replacement die rule cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
– Manufactured to exceed OEM specifications.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with WPM rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!
View “TNT” Coated Die Rule Cutting Blade – .625″ High x 26.750″ Long – Notched PDF
-
Heavy Duty “TNT” Coated Cutting Blade – .625″ High x 26.750″ Long – Notched
Part #: MCB-625-2675-4
Add to QuoteExclusive Walt Powley Inline heavy duty replacement cutting blade for use with WPM, or other manufacture, rotary cutters and die cutters.
Features:
– 26.750″ Long x .625″ High with 24 Notches.
– Heavy duty (thick) replacement cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
– Manufactured to exceed OEM specifications.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with WPM rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!
View Heavy Duty “TNT” Coated Cutting Blade – .625″ High x 26.750″ Long – Notched PDF
-
Mechanical Knife “Gold Holder” – 5/8″ Undercut
Part #: MH-13-01
Add to QuoteExclusive Walt Powley Inline design mechanical knife holder for use with WPM, or other manufacture, 5/8″ undercut honeycomb knife cylinders with circumferences from 35.500″ – 49.606″:
Features:
– 13.375″ overall length.
– Allows for both single cut (chop) and double cut (chip) knifing configurations.
– Solid steel construction of both the knife holder body and front plate.
– “Gold” coated to resist corrosion and rust.
– Mounts with standard 5/8″ – 9/32″ torx screws.
– Utilizes standard replacement 13-3/8″ (12 notch) cutting blade.Advantages:
– Fast makeready – knife holder can be fitted with cutting blade “off-press”.
– Allows for rapid changeover of replacement cutting blades without removing the holder from the knife cylinder.
– Provides huge savings in annual knifing costs and reduced make-ready and downtime. -
Mechanical Knife “Gold Holder” – 3/8″ Undercut
Part #: MH-13-38
Add to QuoteExclusive Walt Powley Inline design mechanical knife holder for use with WPM, or other manufacture, 3/8″ undercut honeycomb knife cylinders with circumferences from 17.750″ – 49.606″:
Features:
– 13.375″ overall length.
– Allows for both single cut (chop) and double cut (chip) knifing configurations.
– Solid steel construction of both the knife holder body and front plate.
– “Gold” coated to resist corrosion and rust.
– Mounts with standard 3/8″ – 9/32″ torx screws.
– Utilizes inexpensive replacement knives.Advantages:
– Fast makeready – knife holder can be fitted with cutting blade “off-press”.
– Allows for rapid changeover of replacement cutting blades without removing the holder from the knife cylinder.
– Provides huge savings in annual knifing costs and reduced make-ready and downtime. -
Front Plate Mounting Bolt for 3/8″ Undercut Mechanical Knife “Gold Holder”
Part #: MH-13-38S
Add to QuoteFor Use With: 3/8″ undercut mechanical knife “Gold Holder”
Features:
– Standard replacement cap screw used to install front plates.View Front Plate Mounting Bolt for 3/8″ Undercut Mechanical Knife “Gold Holder” PDF
-
Front Plate Mounting Bolt for 5/8″ Undercut Mechanical Knife “Gold Holder”
Part #: MH-13-58L
Add to QuoteFor Use With: 5/8″ undercut mechanical knife “Gold Holder”
Features:
– Standard replacement cap screw used to install front plates.View Front Plate Mounting Bolt for 5/8″ Undercut Mechanical Knife “Gold Holder” PDF
-
Replacement Front Plate for 5/8″ Undercut Mechanical Knife “Gold Holder”
Part #: MH-1338-FP
Add to QuoteFor Use With: 5/8″ undercut mechanical knife “Gold Holder”.
Features:
– Standard replacement front plate.
– 13.375″ long.
– Precision machined from steel.
– “Gold” coated to resist corrosion and rust.
– DurableView Replacement Front Plate for 5/8″ Undercut Mechanical Knife “Gold Holder” PDF
-
Replacement Front Plate for 3/8″ Undercut Mechanical Knife “Gold Holder”
Part #: MH-1338-FP38
Add to QuoteFor Use With: 3/8″ undercut mechanical knife “Gold Holder”.
Features:
– Standard replacement front plate.
– 13.375″ long.
– Precision machined from steel.
– “Gold” coated to resist corrosion and rust.
– DurableView Replacement Front Plate for 3/8″ Undercut Mechanical Knife “Gold Holder” PDF
-
Micro/Mini Perf Wheels – 2.50″ OD
Part #: Multiple
Add to QuoteFor Use With: WPM, AGM, Baldwin, ILF, Versa Tech, and Vits:
Features:
– Standard replacement micro/mini perforation wheel.
– 2.50″ OD x 1.25″ ID x .250″ Thick
– 30, 45, 50, 66, 72 Teeth (Cuts) Per Inch available.
– Tie as small as .005″Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
-
White Nylon Stripper Pin Inserts
Part #: NI-1001
Add to QuoteFor Use With: WPM rotary cutters.
Features:
– Standard replacement stripper pin nylon insert.
– Used with all stripper pin sizes.
– Bag of 100Compare to: WPM Part# A25585
-
Internal Bearing Post
Part #: P-50036
Add to QuoteFor Use With: Vits and WPM / AGM rotary plows – 4.187″ diameter.
Features:
– Replacement internal bearing post. -
Plow Shoes
Part #: PS-01
Add to QuoteFor Use With: Vits, WPM, AGM, Baldwin, ILF, Versa Tech, and Gregg, plow folding equipment:
Features:
– Best used when plow folding light weight or single thickness paper.
– Precision machined and assembled from steel to meet or exceed OEM specifications.
– Custom manufactured center post, left or right handed to customer specified widths and lengths.
– Fits 1.25″ diameter mounting shafts.Custom plow shoe widths and lengths can be manufactured upon request. Please click here for plow shoe order form link.
-
Perf Wheel – 2.50″ OD x 10 TPI
Part #: PW-10-250
Add to QuoteFor Use With: WPM, AGM, Baldwin, ILF, Versa Tech, and Vits equipment:
Features:
– Standard replacement perforation wheel.
– 2.50″ OD x 1.125″ ID x .250″ Thick
– 10 TPI or teeth (cuts) per inch
– Size of cut = .069″
– Size of tie = .031″
– Teeth per wheel = 78Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!
-
Perf Wheel – 2.50″ OD x 12 TPI
Part #: PW-12-250
Add to QuoteFor Use With: WPM, AGM, Baldwin, ILF, Versa Tech, and Vits equipment:
Features:
– Standard replacement perforation wheel.
– 2.50″ OD x 1.125″ ID x .250″ Thick
– 12 TPI or teeth (cuts) per inch
– Size of cut = .052″
– Size of tie = .031″
– Teeth per wheel = 95Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!
-
Perf Wheel – 2.50″ OD x 16 TPI
Part #: PW-16-250
Add to QuoteFor Use With: WPM, AGM, Baldwin, ILF, Versa Tech, and Vits equipment:
Features:
– Standard replacement perforation wheel.
– 2.50″ OD x 1.125″ ID x .250″ Thick
– 16 TPI or teeth (cuts) per inch
– Size of cut = .031″
– Size of tie = .031″
– Teeth per wheel = 125Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!
-
Perf Wheel – 2.50″ OD x 8 TPI
Part #: PW-8-250
Add to QuoteFor Use With: WPM, AGM, Baldwin, ILF, Versa Tech, and Vits equipment:
Features:
– Standard replacement perforation wheel.
– 2.50″ OD x 1.125″ ID x .250″ Thick
– 8 TPI or teeth (cuts) per inch
– Size of cut = .062″
– Size of tie = .062″
– Teeth per wheel = 63Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!
-
Plow Linkage Rod
Part #: R-4187-02
Add to QuoteFor Use With: Vits and WPM/AGM plow folding equipment – 4.187″ diameter.
Features:
– 14″ long.
– Fits inside plow stem to connect turn knob to S-connector actuating arm.
– Precision machined to meet or exceed OEM specifications. -
Rotary Plow Assembly
Part #: RP-01
Add to QuoteFor Use With: Vits and WPM / AGM plow folding equipment – 4.187″ diameter.
Features:
– 4.187″ support roller OD.
– 3.50″ OD double beveled rotary plow puck designed to greatly reduce gusseting, cracking, wrinkling and marking on most paper stocks.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications. -
4.25″ Diameter Plow Puck
Part #: RP-02A
Add to QuoteFor Use With: Vits and WPM / AGM rotary plows – 4.187″ diameter.
Features:
– Large diameter replacement plow puck.
– 4.25″ OD
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.
– Single beveled which greatly reduces gusseting, cracking, wrinkling and marking on heavier paper stocks. -
3.50″ Diameter Plow Puck
Part #: RP-02B
Add to QuoteFor Use With: Vits and WPM / AGM rotary plows – 4.187″ diameter.
Features:
-Standard replacement plow puck.
– 3.50″ OD
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.
– Double beveled which greatly reduces gusseting, cracking, wrinkling and marking on most paper stocks. -
Retaining Spring – Dish Knife
Part #: RS-725-01
Add to QuoteFor Use With: WPM rotary cutter infeed shear slitter.
Features:
– Standard replacement retaining spring.
– For use with 4.133″ OD dish knife.Compare to: WPM Part# 263B-400-7-200
-
Recoil Tubing – 1/8″
Part #: RT-125
Add to QuoteFor Use With: Vits and WPM/AGM Air Trolley Assemblies.
Features:
– Replacement flexible recoil air tubing used for connecting air manifold bar to individual air trolley and slitter assemblies.
– Manufactured from durable polyurethane to meet or exceed OEM specifications. -
Slitter Wheel – “Full Grind” – 2.50″ OD w/Bearing
Part #: S-007
Add to QuoteFor Use With: WPM, AGM, Baldwin, ILF, Versa Tech and Vits equipment.
Features:
– Standard replacement slitter wheel.
– 2.50″ OD x 1.125″ ID x .250″ Thick
– Full Grind – No Step
– .500″ bearing ID
– Supplied with a high-quality, double sealed, R8RS low friction bearing installed.Our slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.
We stock a large inventory of pressroom slitter wheels for any application. – Please call!
-
Slitter Wheel – “Full Grind” – 2.50″ OD
Part #: S-007-01
Add to QuoteFor Use With: WPM, AGM, Baldwin, ILF, Versa Tech and Vits equipment.
Features:
– Standard replacement slitter wheel.
– 2.50″ OD x 1.125″ ID x .250″ Thick
– Full Grind – No StepOur slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.
We stock a large inventory of pressroom slitter wheels for any application. – Please call!
-
Support Shaft – Roller Axle
Part #: S-4187-200
Add to QuoteFor Use With: Vits and WPM/AGM plow folding equipment – 4.187″ diameter.
Features:
– 2 7/8″ long plow shaft extension.
– 1.25″ OD shaft diameter.
– 3/8″-16 Thread* Other plow shaft extension lengths available – Please call.
-
Support Shaft – Roller Axle
Part #: S-4187-500
Add to QuoteFor Use With: Vits and WPM/AGM plow folding equipment – 4.187″ diameter.
Features:
– 5″ long plow shaft extension.
– 1.25″ OD shaft diameter.
– 3/8″-16 Thread* Other plow shaft extension lengths available – Please call.
-
Air Slitter/Perf/Score Wheel Holder Assembly
Part #: SA-250-01
Add to QuoteFor Use With: Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Standard air slitter/perf/score wheel holder assembly.
– Complete assembly includes: air cylinder, male elbow, male hex nipple, sleeve valve, and mounting hardware.
– Manufactured to meet or exceed OEM specifications.
– Guard not included. -
Arbor Housing
Part #: SA-250-01-02H
Add to QuoteFor Use With: Air slitter/perf/score wheel holder assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement arbor housing. -
Mounting Body
Part #: SA-250-01-03B
Add to QuoteFor Use With: Air slitter/perf/score wheel holder assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement mounting body. -
Mounting Screw
Part #: SA-250-01-04S
Add to QuoteFor Use With: Air slitter/perf/score wheel holder assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement mounting screw for threaded arbor. -
Arbor
Part #: SA-250-01-05A
Add to QuoteFor Use With: Air slitter/perf/score wheel holder assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement threaded mounting arbor. -
Guide Pin
Part #: SA-250-01-06P
Add to QuoteFor Use With:
- Air slitter/perf/score wheel holder assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
- WPM/AGM air trolley (double wheel) assemblies.
Features:
– Replacement harden guide pin. -
Rectangular Mounting Block
Part #: SA-250-01-07R
Add to QuoteFor Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement mounting block. -
Guard
Part #: SA-250-10G
Add to QuoteFor Use With: Air slitter/perf/score wheel holder assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement guard. -
Score Wheel – 2.50″ OD
Part #: SC-250-031
Add to QuoteFor Use With: WPM, AGM, Baldwin, ILF, Versa Tech and Vits equipment.
Features:
– Standard replacement score wheel.
– 2.50″ OD x 1.125″ ID x .250″ Thick
– Score radius = .041″
– Used to reduce gusseting, cracking, wrinkling and marking when plow folding on heavier paper stocks.
– Manufactured to exacting tolerances from premium quality 52100 steel. -
Custom Perf Blades
Part #: See Below- Please Specify
Add to QuoteFor Use With: WPM rotary cutters.
Features:
– Custom perf blades for “Snap Pack” products that are perforated both head and foot.
– Used to produce perf/cut or perf/cut/perf or perf/cut-cut/perf products.
– 13.375″ Long x .625″ High with 12 Notches.8 TPI = .062″ Cut x .062″ Tie x .070″ Depth of Tie – Part #PB-8-062-062-W
8 TPI = .093″ Cut x .031″ Tie x .070″ Depth of Tie – Part #PB-8-093-031-W
10 TPI = .069″ Cut x .031″ Tie x .070″ Depth of Tie – Part #PB-10-069-031-W
12 TPI = .052″ Cut x .031″ Tie x .070″ Depth of Tie – Part #PB-12-052-031-W
16 TPI = .031″ Cut x .031″ Tie x .070″ Depth of Tie – Part #PB-16-031-031-WPerf blades can be supplied with any combination of cut, tie and depth dimensions upon request. – Please Call
* Please allow 5 business days to manufacture.
-
Long / Thin Stripper Finger
Part #: SF-LT-02
Add to QuoteFor Use With: WPM, Scheffer, and Vits rotary cutters.
Features:
– Standard replacement phenolic stripper finger.
– Long / Thin angled stripper finger.
– Used for lighter weight paper stocks and overall thinner chips. -
Short / Thick Mini Stripper Finger
Part #: SF-SPC
Add to QuoteFor Use With: WPM and Scheffer closed end mailer systems.
Features:
– Standard replacement phenolic stripper finger.
– Short / Thick angled stripper finger.
– Short /Mini body.
– Used for heavier weight paper stocks and overall thicker chips. -
Short / Thick Stripper Finger
Part #: SF-ST-01
Add to QuoteFor Use With: WPM, Scheffer, and Vits rotary cutters.
Features:
– Standard replacement phenolic stripper finger.
– Short / Thick angled stripper finger.
– Used for heavier weight paper stocks and overall thicker chips. -
Steel Shim Tape
Part #: SH-001T
Add to QuoteFor Use With: Rotary Cutting and Rotary Die Cutting Applications.
This steel shim tape allows for accurate make ready and fine height adjustments on rotary dies and cutoff knives. Typically used on rotary cutters and rotary die cutters.
Features:
– .001″ Thick x 10 Meter (32.81 ft) Roll
– High strength self-adhesive one side. -
Steel Shim Tape
Part #: SH-002T
Add to QuoteFor Use With: Rotary Cutting and Rotary Die Cutting Applications.
This steel shim tape allows for accurate make ready and fine height adjustments on rotary dies and cutoff knives. Typically used on rotary cutters and rotary die cutters.
Features:
– .002″ Thick x 10 Meter (32.81 ft) Roll
– High strength self-adhesive one side. -
Steel Shim Tape
Part #: SH-005T
Add to QuoteFor Use With: Rotary Cutting and Rotary Die Cutting Applications.
This steel shim tape allows for accurate make ready and fine height adjustments on rotary dies and cutoff knives. Typically used on rotary cutters and rotary die cutters.
Features:
– .005″ Thick x 10 Meter (32.81 ft) Roll
– High strength self-adhesive one side. -
Longer Stripper Pin
Part #: SP-1000
Add to QuoteFor Use With: WPM rotary cutters.
Features:
– Slightly longer replacement stripper pin.
– .062″ x 1.00″ Long x .093″
– Used for larger chip sizes.
– Bag of 100Compare to: WPM Part# A25555-2 or A25555-3
-
Shortest Stripper Pin
Part #: SP-700
Add to QuoteFor Use With: WPM rotary cutters.
Features:
– Shortest replacement stripper pin available.
– .062″ x .700″ Long x .093″
– Used for smaller chip sizes.
– Bag of 100 -
Shorter Stripper Pin
Part #: SP-860
Add to QuoteFor Use With: WPM rotary cutters.
Features:
– Slightly shorter replacement stripper pin.
– .062″ x .860″ Long x .093″
– Used for smaller chip sizes.
– Bag of 100Compare to: WPM Part# A25555-4
-
Standard Stripper Pin
Part #: SP-930
Add to QuoteFor Use With: WPM rotary cutters.
Features:
– Standard replacement stripper pin.
– .062″ x .930″ Long x .093″
– Bag of 100Compare to: WPM Part# A-25555-1
-
Stripper Pin Insertion Tool
Part #: SP-IT02
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard stripper pin insertion tool.
– Used to insert stripper pins into rotary cutter anvil cylinder.Compare to: Scheffer Part# A17390
-
Support Roller – 1.875″ Wide
Part #: SR-1
Add to QuoteFor Use With: Vits and WPM / AGM plow folding equipment:
Features:
– 4.187″ OD x 1.25″ ID x 1.875 Wide
– Fits 1.25″ diameter mounting shaft.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications. -
Support Roller – 5″ Wide
Part #: SR-5
Add to QuoteFor Use With: Vits and WPM / AGM plow folding equipment:
Features:
– 4.187″ OD x 1.25″ ID x 5.00″ Wide
– Fits 1.25″ diameter mounting shaft.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications. -
Slitter Wheel – 2.50″ OD
Part #: SW-01-250
Add to QuoteFor Use With: WPM, AGM, Baldwin, ILF, Versa Tech and Vits equipment.
Features:
– Standard replacement slitter wheel.
– 2.50″ OD x 1.125″ ID x .250″ ThickOur slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.
We stock a large inventory of pressroom slitter wheels for any application. – Please call!
-
Slitter Wheel – 2.50″ OD w/Bearing
Part #: SWB-01-250
Add to QuoteFor Use With: WPM, AGM, Baldwin, ILF, Versa Tech and Vits equipment.
Features:
– Standard replacement slitter wheel.
– 2.50″ OD x 1.125″ ID x .250″ Thick
– .500″ bearing ID
– Supplied with a high-quality, double sealed, R8RS low friction bearing installed.Our slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.
We stock a large inventory of pressroom slitter wheels for any application. – Please call!
-
Air Trolley Assembly (Single Wheel)
Part #: TA-250-01S
Add to QuoteFor Use With: Vits and WPM/AGM angle bars, seam gluers, prefolders, pattern perforators, and plow towers.
Features:
– Standard single wheel air trolley assembly.
– Complete assembly includes; air cylinder, male elbow swivel, male hex nipple, sleeve valve, rectangular mounting block/hardware and nip wheel.
– Manufactured to meet or exceed OEM specifications. -
Air Trolley/Slitter Assembly – Conversion Kit
Part #: TA-250-02C
Add to QuoteFor Use With: Vits and WPM/AGM angle bars, seam gluers, prefolders, pattern perforators, and plow towers.
Features:
– Converted single wheel air trolley assembly.
– Modified OD axle allows for use of a slitter, perforation, or score wheel.
– Slitter/Perf/Score wheel is fixed in place with two snap rings.Part# TA-250-10A-MOD (axle) and DW-250R-06 (snap ring) allow for the conversion from a single nip wheel assembly to a slitter/perf/score wheel assembly.
-
Yoke
Part #: TA-250-02Y
Add to QuoteFor Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement yoke. -
Nose Mount
Part #: TA-250-03M
Add to QuoteFor Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement nose mount. -
Clamp Bar
Part #: TA-250-04B
Add to QuoteFor Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement clamp bar. -
Sleeve Valve
Part #: TA-250-06V
Add to QuoteFor Use With: Air trolley assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement sleeve valve. -
Hex Nipple
Part #: TA-250-07N
Add to QuoteFor Use With: Air trolley assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement hex nipple. -
Male Elbow Swivel
Part #: TA-250-08E
Add to QuoteFor Use With: Air trolley assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement male elbow swivel. -
Air Cylinder
Part #: TA-250-09C
Add to QuoteFor Use With: Air trolley assemblies on Vits and WPM/AGM angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement air cylinder. -
Axle
Part #: TA-250-10A
Add to QuoteFor Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement nip wheel mounting axle. -
Modified Axle
Part #: TA-250-10A-MOD
Add to QuoteFor Use With: Vits and WPM/AGM air trolley slitter conversion kits on angle bars, seam gluers, prefolders, pattern perforators, and plow towers.
Features:
-Modified axle to covert single nip wheel assembly into a slitter/perf/score wheel assembly.Part# TA-250-10A-MOD replaces standard axle #TA-250-10A to allow for slitter, perforation, or score wheel use.
-
Guard
Part #: TA-250-11G
Add to QuoteFor Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement two-piece guard. -
Washer (Spacer)
Part #: TA-250-11W
Add to QuoteFor Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement washer (spacer) for nip wheel.
– Two washers needed per single nip wheel assembly. -
Nose Mounting Screws
Part #: TA-91251
Add to QuoteFor Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement mounting socket head cap screw.
– Mounts nose mount to the clamp bar.
– Two screws needed per single nip wheel assembly. -
Flat Head Mounting Screws
Part #: TA-91253
Add to QuoteFor Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement flat head socket cap screw.
– Mounts yoke legs to yoke block.
– Four screws needed per single nip wheel assembly. -
Mounting Screws
Part #: TA-91255
Add to QuoteFor Use With: Vits air trolley wheel assemblies and WPM/AGM air trolley (single wheel) assemblies on angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement mounting button head socket cap screw.
– Mounts nip wheel to yoke and axle.
– Two screws needed per single nip wheel assembly. -
Turn Knob
Part #: TK-4187
Add to QuoteFor Use With: Vits and WPM/AGM plow folding equipment – 4.187″ diameter.
Features:
– Precision machined to meet or exceed OEM specifications. -
9/32 Torx Screws – 3/8″
Part #: TS-375
Add to QuoteFor Use With: WPM, or other manufacture, rotary cutters and die cutters.
Features:
– Standard replacement torx screw for mounting molded cutoff knives and dies.
– Used for mounting 3/8″ high (undercut) molded cutoff knives and die clamp assemblies.
– Bag of 100Compare to: WPM Part # A25618
-
9/32 Torx Screws – 5/8″
Part #: TS-625
Add to QuoteFor Use With: WPM, or other manufacture, rotary cutters and die cutters.
Features:
– Standard replacement torx screw for mounting molded cutoff knives and dies.
– Used for mounting 5/8″ high (undercut) molded cutoff knives and die clamp assemblies.
– Bag of 100Compare to: WPM Part # B25632
-
Nip Wheel – White Delrin – 2.50″ OD
Part #: TW-250-1-W
Add to QuoteFor Use With: Vits air trolley wheel assemblies and WPM/AGM single wheel air trolley assemblies.
Features:
– Standard replacement air trolley wheel.
– 2.50″ OD x 1.25″ ID x .9375″ Wide
– .475″ bearing ID
– Manufactured from delrin and supplied with high-quality, double sealed, 6201 low friction bearings. – Qty 2
– Meets or exceeds OEM specifications. -
Nip Wheel – Red Polyurethane – 2.50″ OD
Part #: TW-250-2-RU
Add to QuoteFor Use With: Vits air trolley wheel assemblies and WPM single wheel air trolley assemblies.
Features:
– Standard replacement air trolley wheel.
– 2.50″ OD x 1.25″ ID x .9375″ Wide
– .475″ bearing ID
– Manufactured from red polyurethane and supplied with high-quality, double sealed, 6201 low friction bearings. – Qty 2
– Meets or exceeds OEM specifications. -
Nip Wheel – Blue Urethane – 2.50″ OD
Part #: TW-250-4-P
Add to QuoteFor Use With: Vits air trolley wheel assemblies and WPM single wheel air trolley assemblies.
Features:
– Standard replacement air trolley wheel.
– 2.50″ OD x 1.25″ ID x .9375″ Wide
– .475″ bearing ID
– Manufactured from blue urethane and supplied with high-quality, double sealed, 6201 low friction bearings. – Qty 2
– Meets or exceeds OEM specifications. -
Recovered Nip Wheel – Blue Urethane – 2.50″ OD
Part #: TW-250-OR
Add to QuoteFor Use With: Vits air trolley wheel assemblies and WPM single wheel air trolley assemblies.
Ship us your existing worn nip wheels and our recovering service will remove and replace the covering and bearings. NO MINIMUMS
Features:
– Allows reuse of nip wheels
– New blue urethane covering and new set of bearings
– Standard replacement air trolley wheel.
– 2.50″ OD x 1.25″ ID x .9375″ Wide
– .475″ bearing ID
– Manufactured from blue urethane and supplied with high-quality, double sealed, 6201 low friction bearings. – Qty 2
– Meets or exceeds OEM specifications. -
Nip Wheel – Red Polyurethane – 2.50″ OD
Part #: TW-250R-01
Add to QuoteFor Use With: WPM, AGM, Baldwin, ILF and Versa Tech equipment.
Features:
– Standard replacement air trolley wheel.
– 2.50″ OD x 1.125″ ID x .500″ Wide
– .500″ bearing ID
– Manufactured from polyurethane and supplied with a high-quality, double sealed, R8RS low friction bearing.
– Meets or exceeds OEM specifications.Compare to: WPM Part# 9024B
-
Nip Wheel – White Delrin – 2.50″ OD
Part #: TW-250W-02
Add to QuoteFor Use With: WPM, AGM, Baldwin, ILF and Versa Tech equipment.
Features:
– Standard replacement air trolley wheel.
– 2.50″ OD x 1.125″ ID x .500″ Wide
– .500″ bearing ID
– Manufactured from delrin and supplied with a high-quality, double sealed, R8RS low friction bearing.
– Meets or exceeds OEM specifications. -
Nip Wheel – Yellow Polyurethane – 2.50″ OD
Part #: TW-250Y-03
Add to QuoteFor Use With: WPM, AGM, Baldwin, ILF, Versa Tech and Gregg equipment.
Features:
– Standard replacement air trolley wheel.
– 2.50″ OD x 1.125″ ID x .500″ Wide
– .500″ bearing ID
– Manufactured from polyurethane and supplied with a high-quality, double sealed, R8RS low friction bearing.
– Meets or exceeds OEM specifications.
Part not listed?
We are experts at sourcing and manufacturing spare parts and consumables. We are confident that we can find or manufacture you the parts your operation needs!