Scheffer / Global Web Finishing
Home › Parts Shop › Scheffer / Global Web Finishing
-
Nip Wheel – Rubber Covered
Part #: 1-1897 & 1-5246
Add to QuoteFor Use With: Scheffer, Global Web Finishing and I-Web equipment.
Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.102″ ID x .750″ Wide
– .475″ bearing ID
– High-quality, double sealed, 6001RS low friction bearing. – Qty 2
– Covered with clear rubber urethane material. -
20″ Knife Holder
Part #: 20-1251
Add to QuoteFor Use With: Scheffer rotary cutters with 5/8″ knife cylinder undercut.
Features:
– Standard replacement 20″ knife holder assembly.
– Utilizes standard replacement 20″ x .625″ high (6 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications. -
20″ Bridge Spacer
Part #: 20-1294
Add to QuoteFor Use With: Scheffer rotary cutters with 5/8″ knife cylinder undercut.
Features:
– Standard replacement 20″ bridge spacer.
– Precision machined to meet or exceed OEM specifications. -
Shear Slitter Anvil Knife – 5.905″OD
Part #: 5905-400-100-SA
Add to QuoteFor Use With: Scheffer / Global Web Finishing inline shear slitting station.
Features:
– Premium anvil (bottom) knife.
– 5.905″ OD x 4.00″ ID x 1.00″ Wide
– Split anvil knife (two-halves).
– Three set screws.
– Double edged.Compare to: Scheffer Part# 540059066 or 2-6065
Our anvil knives are manufactured to exacting tolerances from high quality D2 tool steel.
-
Custom Chip Size Spacers
Part #: 66e4989c53cb9
Add to QuoteFor Use With: 12″ KCO Style Double (Chip) Knife Holder Assembly
Features:
– 12″ Long
– Custom chip spacers can be manufactured in sizes from 1/4″ (.250″) – 1/2″ (.500″).* Please specify chip size and circumference of rotary cutter when ordering.
-
Retaining Washer
Part #: A10473
Add to QuoteFor Use With: Scheffer rotary plows – 6.00″ diameter.
Features:
– Positioned between the rotary plow puck and the cap screw. -
Base Mounting Plate
Part #: A20235
Add to QuoteFor Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.
Features:
– Precision machined to meet or exceed OEM specifications. -
Pivot Stud
Part #: A27320
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary plows – 4.25″ diameter.
Features:
– Replacement threaded pivot post stud.
– Screws into the internal plow puck mounting bracket. -
Slotted Air Nozzle
Part #: AZ-125-512APT
Add to QuoteFor Use With: Scheffer rotary cutter chip removal.
Features:
– Standard replacement slotted air nozzle for chip blast/removal. -
Wide Air Nozzle
Part #: AZ-250-512
Add to QuoteFor Use With: Scheffer rotary cutter chip removal.
Features:
– Standard replacement air nozzle for chip blast/removal. -
Axle Shaft
Part #: B01545
Add to QuoteFor Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.
Features:
– Precision machined to meet or exceed OEM specifications. -
Knob
Part #: B01552
Add to QuoteFor Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.
Features:
– Precision machined to meet or exceed OEM specifications. -
Linkage – Actuating Arm
Part #: B09106 & B09110
Add to QuoteFor Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.
Features:
– Precision machined to meet or exceed OEM specifications. -
Mounting Collar – Split
Part #: B10818
Add to QuoteReplacement split mounting collar for use with 17.750″/35.500″ or 17.795″/35.590″ circumference kicker wheel assembly:
– Standard replacement split mounting collar.
– For use with kicker wheel assembly Part# C26356-1. -
Side Plate
Part #: B20211
Add to QuoteFor Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.
Features:
– Precision machined to meet or exceed OEM specifications. -
Stud Rack
Part #: B20840-3
Add to QuoteFor Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.
Features:
– 20.5″ long.
– Fits inside plow stem to connect turn knob to actuating arm.
– Precision machined to meet or exceed OEM specifications. -
Threaded Extension Shaft
Part #: B25916
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary plows – 4.25″ & 6.00″ diameter.
Features:
– 1.377″ OD
– 4.00″ overall length -
Mounting Collar – Split
Part #: B26357
Add to QuoteReplacement split mounting collar for use with 22.750″/45.500″, 22.776″/45.552″, 22.8375″/45.675″, 625mm/1250mm or 630mm/1260mm circumference kicker wheel assembly:
– Standard replacement split mounting collar.
– For use with kicker wheel assembly Part#’s C26355, C26686 & C33204. -
Block Adjustment Stop
Part #: B42700
Add to QuoteFor Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.
Features:
– Precision machined to meet or exceed OEM specifications. -
Collar
Part #: B42709
Add to QuoteFor Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.
Features:
– Precision machined to meet or exceed OEM specifications. -
Bearing
Part #: BB-21446
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary plows – 4.25″ diameter.
Features:
– Internal replacement bearing.
– Metal shielded low friction bearing that meets or exceeds OEM specifications. -
Air Trolley Assembly
Part #: C-41061
Add to QuoteFor Use With: Scheffer / Global Web Finishing angle bars, seam gluers, prefolders, pattern perforators, and plow towers.
Features:
– Standard single wheel air trolley assembly.
– 2″ round bar holder frame.
– Complete assembly includes; air cylinder, sleeve valve, air regulator and compression fitting.
– Manufactured to meet or exceed OEM specifications.Compare to: Scheffer Part# C41061
-
Air Slitter/Perf/Score Wheel Holder Assembly
Part #: C-41062
Add to QuoteFor Use With: Scheffer / Global Web Finishing angle bars, seam gluers, prefolders, pattern perforators, and plow towers.
Features:
– Standard slitter/perf/score wheel air trolley assembly.
– 2″ round bar holder frame.
– Complete assembly includes; air cylinder, sleeve valve, and compression fitting.
– Guard Not Included.
– Manufactured to meet or exceed OEM specifications.Compare to: Scheffer Part# C41062
-
Air Cylinder
Part #: C-802L
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement air cylinder. -
Guard
Part #: C03826
Add to QuoteFor Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement guard. -
Support Roller – 4.25″ Diameter x 3.12″ Wide
Part #: C09116 or 09123-2
Add to QuoteFor Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ diameter.
Features:
– 4.25″ OD x 1.377″ ID x 3.12″ Wide
– Fits 1.377″ diameter mounting shaft.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications. -
Support Roller – 4.25″ Diameter x 1.75″ Wide
Part #: C09121 or 09122-2
Add to QuoteFor Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ diameter.
Features:
– 4.25″ OD x 1.377″ ID x 1.75″ Wide
– Fits 1.377″ diameter mounting shaft.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications. -
Rotary Plow Assembly – 6.00″ Diameter
Part #: C11426
Add to QuoteFor Use With: Scheffer rotary plows – 6.00″ diameter.
Features:
– Replacement rotary plow assembly.
– 6.00″ support roller OD.
– 5.00″ OD single beveled rotary plow puck designed to greatly reduce guessing, cracking, wrinkling and marking on most paper stocks.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications. -
Scale
Part #: C14786
Add to QuoteReplacement 360 degree scale for use with 17.750″/35.500″ or 17.795″/35.590″ circumference kicker wheel assembly:
– 360 degree adhesive mounted replacement scale.
– For use with kicker wheel assembly Part# C26356-1. -
Scale
Part #: C14808
Add to QuoteReplacement 360 degree scale for use with 22.750″/45.500″, 22.776″/45.552″ or 22.8375″/45.675″ circumference kicker wheel assembly:
– 360 degree adhesive mounted replacement scale.
– For use with kicker wheel assembly Part# C26355. -
Scale
Part #: C14808-630
Add to QuoteReplacement 360 degree scale for use with 625mm/1250mm or 630mm/1260mm circumference kicker wheel assembly:
– 360 degree adhesive mounted replacement scale.
– For use with kicker wheel assembly Part# C26686 & C33204 -
Support Roller – 6.00″ Diameter x 2.00″ Wide
Part #: C15712
Add to QuoteFor Use With: Scheffer plow folding equipment – 6.00″ diameter.
Features:
– 6.00″ OD x 2.00″ Wide x Beveled ID
– Replacement support roller only for use with 6.00″ diameter rotary plow assembly.
– Precision machined to meet or exceed OEM specifications. -
Skate Assembly – Single Wheel
Part #: C17051
Add to QuoteFor Use With: Scheffer rotary cutters with skate delivery tables.
Features:
– Standard replacement skate assembly – single wheel.
– Precision machined to meet or exceed OEM specifications.Compare to: Scheffer Part# C17051
-
Web Deflector (Whale Tail)
Part #: C17967
Add to QuoteFor Use With: Scheffer rotary cutter delivery tables.
Features:
– Standard replacement web deflector.
– Manufactured from durable Lexan material.
– Used to assist with product “shingling” or delivery onto rotary cutter delivery table.Compare to: Scheffer Part# C17967
-
Web Deflector (Whale Tail)
Part #: C17969
Add to QuoteFor Use With: Scheffer rotary cutter delivery tables.
Features:
– Standard replacement web deflector.
– Manufactured from durable Lexan material.
– Used to assist with product “shingling” or delivery onto rotary cutter delivery table.Compare to: Scheffer Part# C17969
-
12″ Lead Edge T-Bar/Front Plate
Part #: C19560 or SKFP-12-01L
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard replacement 12″ lead edge T-Bar/Front Plate for use with traditional style knife holders.
– Precision machined from steel to meet or exceed OEM specifications.
– DurableCompare to Scheffer Part# C19560
-
12″ Trail Edge T-Bar/Front Plate
Part #: C19561 or SKFP-12-02T
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard replacement 12″ trail edge T-Bar/Front Plate for use with traditional style knife holders.
– Precision machined from steel to meet or exceed OEM specifications.
– DurableCompare to Scheffer Part# C19561
-
Web Deflector (Whale Tail)
Part #: C19708
Add to QuoteFor Use With: Scheffer rotary cutter delivery tables.
Features:
– Standard replacement web deflector.
– Manufactured from durable Lexan material.
– Used to assist with product “shingling” or delivery onto rotary cutter delivery table.Compare to: Scheffer Part# C19708
-
Web Deflector (Whale Tail)
Part #: C19709
Add to QuoteFor Use With: Scheffer rotary cutter delivery tables.
Features:
– Standard replacement web deflector.
– Manufactured from durable Lexan material.
– Used to assist with product “shingling” or delivery onto rotary cutter delivery table.Compare to: Scheffer Part# C19709
-
Internal Plow Puck Mounting Bracket
Part #: C21434
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary plows – 4.25″ diameter.
Features:
– Replacement internal housing bracket to mount rotary plow puck. -
Rotary Plow Assembly – 4.25″ Diameter
Part #: C21446
Add to QuoteFor Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ diameter.
Features:
– 4.25″ support roller OD.
– 3.625″ OD double beveled rotary plow puck designed to greatly reduce gusseting, cracking, wrinkling and marking on most paper stocks.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications. -
Kicker Wheel Assembly For 22.750″/45.500″, 22.776″/45.552″ or 22.8375″/45.675″ Circ. Rotary Cutters
Part #: C26355 or B26357
Add to QuoteStandard replacement kicker wheel (knock-down) assembly for use Scheffer rotary cutters with a 22.750″/45.500″, 22.776″/45.552″ or 22.8375″/45.675″ circumference:
– 22.750″/45.500″, 22.776″/45.552″ or 22.8375″/45.675″ circumference.
– Includes metal mounting collar.C26355 & B26357 kicker wheel assembly is for use with full-web (16 page) delivery tables.
-
Kicker Wheel Assembly For 17.750″/35.500″ or 17.795″/35.590″ Circ. Rotary Cutters
Part #: C26356-1
Add to QuoteStandard replacement kicker wheel (knock-down) assembly for use Scheffer rotary cutters with a 17.750/35.500″ or 17.795″/35.590″ circumference:
– 17.750″/35.500″ or 17.795″/35.590″ circumference.
– Includes metal mounting collar.C26356-1 kicker wheel assembly is for use with half-web (8 page) delivery tables.
View Kicker Wheel Assembly For 17.750″/35.500″ or 17.795″/35.590″ Circ. Rotary Cutters PDF
-
Kicker Wheel Assembly For 625mm/1250mm or 630mm/1260mm Circ. Rotary Cutters
Part #: C26686 or C33204
Add to QuoteStandard replacement kicker wheel (knock-down) assembly for use Scheffer rotary cutters with a 625mm/1250mm or 630mm/1260mm circumference:
– 625mm/1250mm or 630mm/1260mm circumference.
– Includes metal mounting collar.C26686 & C33204 kicker wheel assemblies are for use with full-web (16 page) delivery tables.
View Kicker Wheel Assembly For 625mm/1250mm or 630mm/1260mm Circ. Rotary Cutters PDF
-
Web Deflector (Whale Tail)
Part #: C32493
Add to QuoteFor Use With: Scheffer rotary cutter delivery tables.
Features:
– Standard replacement web deflector.
– Manufactured from durable Lexan material.
– Used to assist with product “shingling” or delivery onto rotary cutter delivery table.Compare to: Scheffer Part# C32493
-
3.70″ Diameter Plow Puck
Part #: C41222
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary plows – 4.25″ diameter.
Features:
– Alternative replacement plow puck.
– 3.70″ OD
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.
– Double beveled which greatly reduces gusseting, cracking, wrinkling and marking on most paper stocks. -
Axle
Part #: C44477
Add to QuoteFor Use With: Scheffer rotary cutters with skate delivery tables.
Features:
– Standard replacement axle for single wheel skate assembly.
– Precision machined to meet or exceed OEM specifications. -
Bearing – Skate Wheel
Part #: C60355
Add to QuoteFor Use With: Scheffer rotary cutters with skate delivery tables.
Features:
– Standard replacement bearing for single wheel skate assembly.
– Two bearings needed per skate wheel. -
Metal Turn Handle
Part #: C64835
Add to QuoteFor Use With: Scheffer rotary cutters with skate delivery tables.
Features:
– Standard replacement metal turn handle for single wheel skate assembly. -
Spring
Part #: C90805
Add to QuoteFor Use With: Scheffer rotary cutters with skate delivery tables.
Features:
– Standard replacement rear tension spring for single wheel skate assembly. -
Plastic Turn Knob
Part #: C94052
Add to QuoteFor Use With: Scheffer rotary cutters with skate delivery tables.
Features:
– Standard replacement plastic turn knob for single wheel skate assembly. -
Creasing (Score) Ribs
Part #: CR-1032
Add to QuoteFor Use With: Scheffer / Global Web Finishing inline scoring units.
Features:
– Standard replacement creasing (score) rib.
– Used to score medium to heavy paper stocks.
– Greatly reduces gusseting, cracking, wrinkling and marking on medium to heavy paper stocks.Compare to: Part# M-34
-
Creasing (Score) Ribs
Part #: CR-1034
Add to QuoteFor Use With: Scheffer / Global Web Finishing inline scoring units.
Features:
– Standard replacement creasing (score) rib.
– Used to score heavy to extra heavy paper stocks.
– Greatly reduces gusseting, cracking, wrinkling and marking on heavy to extra heavy paper stocks.Compare to: Part# M-33
-
Compression Fitting
Part #: D-150C
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement compression fitting. -
Female Coupler
Part #: D-150F
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement female coupler. -
Male Barbed Fitting
Part #: D-150M
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement male barbed fitting. -
Branched Tee
Part #: D-150T
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement branched tee. -
Support Roller – 6.00″ Diameter x 3.12″ Wide
Part #: D1506
Add to QuoteFor Use With: Scheffer plow folding equipment – 6.00″ diameter.
Features:
– 6.00″ OD x 1.377″ ID x 3.12″ Wide
– Fits 1.377″ diameter mounting shaft.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications. -
Support Roller – 6.00″ Diameter x 1.75″ Wide
Part #: D1506-1
Add to QuoteFor Use With: Scheffer plow folding equipment – 6.00″ diameter.
Features:
– 6.00″ OD x 1.377″ ID x 1.75″ Wide
– Fits 1.377″ diameter mounting shaft.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications. -
Support Roller – 6.00″ Diameter x 1.31″ Wide
Part #: D1551
Add to QuoteFor Use With: Scheffer plow folding equipment – 6.00″ diameter.
Features:
– 6.00″ OD x 1.377″ ID x 1.31″ Wide
– Fits 1.377″ diameter mounting shaft.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications. -
12″ Traditional Style Scheffer / Global Web Finishing Knife Holder – 22.776″/45.552″ Circ.
Part #: D16761 or SKB-12-450
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– 22.776″/45.552″ Circumference.
– Standard replacement 12″ traditional style knife holder.
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.Compare to: Scheffer Part# D16761
View 12″ Traditional Style Scheffer / Global Web Finishing Knife Holder – 22.776″/45.552″ Circ. PDF
-
12″ Traditional Style Scheffer / Global Web Finishing Knife Holder – 22.8375″/45.675″ Circ.
Part #: D17116 or SKB-12-450
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– 22.8375″/45.675″ Circumference.
– Standard replacement 12″ traditional style knife holder.
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.Compare to: Scheffer Part# D17116
View 12″ Traditional Style Scheffer / Global Web Finishing Knife Holder – 22.8375″/45.675″ Circ. PDF
-
12″ Traditional Style Scheffer / Global Web Finishing Knife Holder – 22.750″/45.500″ Circ.
Part #: D17498 or SKB-12-450
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– 22.750″/45.500″ Circumference.
– Standard replacement 12″ traditional style knife holder.
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.Compare to: Scheffer Part# D17498
View 12″ Traditional Style Scheffer / Global Web Finishing Knife Holder – 22.750″/45.500″ Circ. PDF
-
12″ Traditional Style Scheffer / Global Web Finishing Knife Holder – 630mm/1260mm Circ.
Part #: D18286 or SKB-12-49606
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– 630mm/1260mm Circumference.
– Standard replacement 12″ traditional style knife holder.
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.Compare to: Scheffer Part# D18286
View 12″ Traditional Style Scheffer / Global Web Finishing Knife Holder – 630mm/1260mm Circ. PDF
-
12″ Traditional Scheffer / Global Web Finishing Knife Holder – 17.750″/35.500″ & 17.795″/35.590″ Circ.
Part #: D18384 or SKB-12-350
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– 17.750″/35.500″ & 17.795″/35.590″ Circumference.
– Standard replacement 12″ traditional style knife holder.
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.Compare to: Scheffer Part# D18384
-
Support Roller – 4.25″ Diameter x 1.31″ Wide
Part #: D20086
Add to QuoteFor Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ diameter.
Features:
– 4.25″ OD x 1.377″ ID x 1.31″ Wide
– Plow stem support rollers (fit between vertical plow stem bracket).
– Fits 1.377″ diameter mounting shaft.
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications. -
Web Deflector (Whale Tail)
Part #: D24035
Add to QuoteFor Use With: Scheffer rotary cutter delivery tables.
Features:
– Standard replacement web deflector.
– Manufactured from durable Lexan material.
– Used to assist with product “shingling” or delivery onto rotary cutter delivery table.Compare to: Scheffer Part# D24035
-
12″ Traditional Style Scheffer / Global Web Finishing Knife Holder – 625mm/1250mm Circ.
Part #: D29045 or SKB-12-49606
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– 625mm/1250mm Circumference.
– Standard replacement 12″ traditional style knife holder.
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.Compare to: Scheffer Part# D29045
View 12″ Traditional Style Scheffer / Global Web Finishing Knife Holder – 625mm/1250mm Circ. PDF
-
Shear Slitter Dish Knife – 5.905″ OD – Scheffer
Part #: DK-150-80-25
Add to QuoteFor Use With: Inline shear slitting and WPM & Scheffer / Global Web Finishing inline shear slitting stations.
Features:
– Premium male dish knife.
– 5.905″ OD x 3.149″ ID x .098″ Thick with KeywayCompare to: Scheffer Part# 128216
Our dish/circular knives are manufactured to exacting tolerances from high quality D2 tool steel and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
Shear Slitter Dish Knife – 5.00″ OD – Scheffer
Part #: DK-5000-05
Add to QuoteFor Use With: Inline shear slitting and Scheffer / Global Web Finishing inline shear slitting stations.
Features:
– Premium male dish knife.
– 5.00″ OD x 2.875″ ID x .059″ ThickCompare to: Scheffer Part# 1-1550
Our dish/circular knives are manufactured to exacting tolerances from high quality D2 tool steel and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
Brass Hold Down Nut – Scheffer (Metric)
Part #: DTN-200M
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Metric (M6 x 1.0) replacement brass dovetail hold down nut.
– For use with both traditional and KCO style Scheffer knife holders.Compare to: Scheffer Part# A32127
-
Brass Dovetail Hold Down Nut
Part #: DTN-200S
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard replacement brass dovetail hold down nut.
– For use with both traditional and KCO style Scheffer / Global Web Finishing knife holders.Compare to: Scheffer Part# A16736
-
Holder Frame
Part #: F-8212
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement 2″ round bar holder frame. -
Glue Skiver – Scheffer – Right Hand
Part #: GS-004RS
Add to QuoteFor Use With: Scheffer Remoist and Seam (Wet) Gluers:
Features:
– Standard replacement right handed glue skiver/wiper.
– Assists in preventing glue slinging/spitting.
– Reduces gluer cleanup.Compare to: Scheffer Part# B31572
-
Glue Skiver – Scheffer – Left Hand
Part #: GS-005LS
Add to QuoteFor Use With: Scheffer Remoist and Seam (Wet) Gluers:
Features:
– Standard replacement left handed glue skiver/wiper.
– Assists in preventing glue slinging/spitting.
– Reduces gluer cleanup.Compare to: Scheffer Part# B31572
-
Glue Skiver – Scheffer Portable Flex Gluers
Part #: GS-006
Add to QuoteFor Use With: Scheffer Portable Flex Gluers:
Features:
– Standard replacement glue skiver/wiper.
– Assists in preventing glue slinging/spitting.
– Reduces gluer cleanup.Compare to: Scheffer Part# B34289
-
Metal Turn Handle
Part #: H-1075
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement metal turn handle. -
Pneumatic Hose
Part #: H-1552
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement pneumatic hose. -
Mounting Cap Screw For T-Bars/Front Plates
Part #: HDN-10-24
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard replacement mounting cap screw for traditional style knife holder T-Bars/Front Plates.
– Used to mount T-Bars/Front Plates to traditional style knife holder body. -
Mounting Cap Screw
Part #: HDN-250-28
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard replacement mounting cap screw for traditional style knife holder body. -
Key Slitter
Part #: K-16440
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement key slitter.Compare to: Scheffer Part# A16440
-
Metal Turn Knob
Part #: K-170
Add to QuoteFor Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement threaded metal turn knob. -
Barrel Insert
Part #: KCO-1001-B
Add to QuoteFor Use With: Vits and Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard replacement barrel insert for use with Vits and KCO style Scheffer / Global Web Finishing knife holders. -
Tab Plunger
Part #: KCO-1002-P
Add to QuoteFor Use With: Vits and Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard replacement tab plunger for use with Vits and KCO style Scheffer / Global Web Finishing knife holders. -
Set Screw
Part #: KCO-1004-S
Add to QuoteFor Use With: Vits and Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard replacement set screw for use with Vits and KCO style Scheffer / Global Web Finishing knife holders. -
Spring
Part #: KCO-1006-SP
Add to QuoteFor Use With: Vits and Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard replacement spring for use with Vits and KCO style Scheffer / Global Web Finishing knife holders. -
12″ KCO Style Scheffer / Global Web Finishing Knife Holder Assembly – 17.750″/35.500″ & 17.795″/35.590″ Circ.
Part #: KCO-12-35500
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– 17.750″/35.500″ & 17.795″/35.590″ Circumference.
– Standard replacement 12″ KCO style knife holder assembly.
– Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.Compare to: Scheffer Part# D37398
-
12″ KCO Style Scheffer / Global Web Finishing Knife Holder Assembly – 22.750″/45.500″ – 24.803″/49.606″ Circ.
Part #: KCO-12-45-49606
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– 22.750″/45.500″, 22.776″/45.552″, 22.8375″/45.675″, 23.00″/46.00″ & 24.803″/49.606″ Circumference.
– Standard replacement 12″ KCO style knife holder assembly.
– Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.Please specify circumference of rotary cutter when ordering.
Compare to: Scheffer Part# D37374
-
20″ KCO Style Scheffer / Global Web Finishing Knife Holder Assembly – 22.750″/45.500″ – 24.803″/49.606″ Circ.
Part #: KCO-20-45-49606
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– 22.750″/45.500″, 22.776″/45.552″, 22.8375″/45.675″, 23.00″/46.00″ & 24.803″/49.606″ Circumference.
– Standard replacement 20″ KCO style knife holder assembly.
– Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
– Utilizes standard replacement 20″ (6 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.Please specify circumference of rotary cutter when ordering.
Compare to: Scheffer Part# D36843 & D37332
-
24″ KCO Style Scheffer / Global Web Finishing Knife Holder Assembly – 17.750″/35.500″ & 17.795″/35.590″ Circ.
Part #: KCO-24-35500
Add to QuoteExclusive Walt Powley Inline 24″ KCO knife holder assembly.
For Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– 17.750″/35.500″ & 17.795″/35.590″ Circumference.
– 24″ KCO style knife holder assembly.
– Mount one knife holder, instead of two, when using a 24″ long cutting blade.
– Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
– Utilizes standard replacement 24″ (8 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications. -
24″ KCO Style Scheffer / Global Web Finishing Knife Holder Assembly – 22.750″/45.500″ – 24.803″/49.606″ Circ.
Part #: KCO-24-45-49606
Add to QuoteExclusive Walt Powley Inline 24″ KCO knife holder assembly.
For Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– 22.750″/45.500″, 22.776″/45.552″, 22.8375″/45.675″, 23.00″/46.00″ & 24.803″/49.606″ Circumference.
– 24″ KCO style knife holder assembly.
– Mount one knife holder, instead of two, when using a 24″ long cutting blade.
– Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
– Utilizes standard replacement 24″ (8 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.Please specify circumference of rotary cutter when ordering.
-
12″ KCO Style – Double (Chip) Knife Holder Assembly – 17.750″/35.500″ & 17.795″/35.590″ Circ.
Part #: KCO-250-35500
Add to QuoteExclusive Walt Powley Inline design double (chip) knife holder assembly for use with Scheffer / Global Web Finishing rotary cutters.
Features:
– 17.750″/35.500″ & 17.795″/35.590″ Circumference.
– Can be configured to take chip cuts between 1/4″ (.250″) – 1/2″ (.500″) in size within a single knife holder.
– Dual function knife holder – Can be utilized as a single (chop) cut knife holder with the removal of the chip spacer and front plate.
– Includes all internal hardware (modified tab plunger, barrel insert, set screw and spring), chip spacer, and front plate.
– Utilizes standard replacement 12″ (4 notch) cutting blade.Advantages:
– Fast make-ready – mount only one knife holder, instead of two, when taking chips.
– Make-ready chip area with a single strip of foam rubber – Save time and money by drastically reducing the need to cut, fold, trim, etc. multiple layers of foam rubber.
– Greatly assists chip placement onto stripper pins for successful and consistent chip removal.
– Provides for a rapid changeover of replacement cutting blades without removing the holder from the knife cylinder.20″ & 24″ Length KCO Style Double (Chip) Knife Holder Assembly – Also Available.
* Please specify chip size when ordering.
-
12″ KCO Style – Double (Chip) Knife Holder Assembly – 22.750″/45.500″ – 24.803″/49.606″ Circ.
Part #: KCO-250-45500
Add to QuoteExclusive Walt Powley Inline design double (chip) knife holder assembly for use with Scheffer / Global Web Finishing rotary cutters.
Features:
– 22.750″/45.500″, 22.776″/45.552″, 22.8375″/45.675″, 23.00″/46.00″ & 24.803″/49.606″ Circumference.
– Can be configured to take chip cuts between 1/4″ (.250″) – 1/2″ (.500″) in size within a single knife holder.
– Dual function knife holder – Can be utilized as a single (chop) cut knife holder with the removal of the chip spacer and front plate.
– Includes all internal hardware (modified tab plunger, barrel insert, set screw and spring), chip spacer, and front plate.
– Utilizes standard replacement 12″ (4 notch) cutting blade.Advantages:
– Fast make-ready – mount only one knife holder, instead of two, when taking chips.
– Make-ready chip area with a single strip of foam rubber – Save time and money by drastically reducing the need to cut, fold, trim, etc. multiple layers of foam rubber.
– Greatly assists chip placement onto stripper pins for successful and consistent chip removal.
– Provides for a rapid changeover of replacement cutting blades without removing the holder from the knife cylinder.20″, 24″ & 28″ length KCO Style Double (Chip) Knife Holder Assembly – Also available.
* Please specify chip size when ordering.
-
Modified Swing Hinge Connector
Part #: KCO-250-E
Add to QuoteFor Use With: KCO Style Double (Chip) Knife Holder Assembly
Features:
– Modified swing hinge connector allows for 1/4″ – 3/8″ chip spacer and front plate lockup. -
28″ KCO Style Scheffer / Global Web Finishing Knife Holder Assembly
Part #: KCO-28-45-49606
Add to QuoteExclusive Walt Powley Inline 28″ KCO knife holder assembly.
For Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– 22.750″/45.500″, 22.776″/45.552″, 22.8375″/45.675″, 23.00″/46.00″ & 24.803″/49.606″ Circumference.
– 28″ KCO style knife holder assembly.
– Includes all internal hardware (tab plunger, barrel insert, set screw and spring).
– Utilizes standard replacement 28″ (10 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications.Please specify circumference of rotary cutter when ordering.
View 28″ KCO Style Scheffer / Global Web Finishing Knife Holder Assembly PDF
-
Modified Swing Hinge Connector
Part #: KCO-500-E
Add to QuoteFor Use With: KCO Style Double (Chip) Knife Holder Assembly
Features:
– Modified swing hinge connector allows for 1/2″ chip spacer and front plate lockup. -
Split Washer
Part #: KCO-SW250
Add to QuoteFor Use With: Vits and Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard replacement split washer for Vits and KCO style Scheffer / Global Web Finishing knife holders.
– Split washer is positioned below the mounting cap screw and above the retaining washer within the knife holder body. -
Retaining Washer
Part #: KCO-W375
Add to QuoteFor Use With: Vits and Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard replacement stainless steel retaining washer for Vits and KCO style Scheffer / Global Web Finishing knife holders.
– Retaining washer is positioned between the split washer and knife holder body. -
Piston Linkage
Part #: L-1540
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement air cylinder piston linkage assembly.
– Connects air cylinder to pivot arm. -
Shoulder Mounting Bolt
Part #: MB-425
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary plows – 4.25″ diameter.
Features:
– Used to mount plow puck to rotary plow assembly. -
Knife Locator Clips
Part #: MC-042
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard replacement die rule knife locator clip.
– Mounted to knife locator drop down bar.Compare to: Scheffer Part# B16912
-
20″ Cutting Blade – 5/8″ High
Part #: MCB-625-20-01
Add to QuoteFor Use With: Scheffer rotary cutters with 5/8″ knife cylinder undercut.
Features:
– 20″ Long x .625″ High x 6 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.Compare to: Scheffer Part# 20-1247
Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
Micro/Mini Perf Wheels – 3.03″ OD
Part #: N/A
Add to QuoteFor Use With: Scheffer, Global Web Finishing & I-Web equipment.
Features:
– Standard replacement micro/mini perforation wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– 30, 45, 50, 66, 72 Teeth (Cuts) Per Inch available.
– Tie as small as .005″Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
-
Roll Pin
Part #: P-529
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement roll pin.
– Inserts into pivot arm. -
Pivot Pin
Part #: P-5345
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement pivot pin.
– Connects holder frame to pivot arm. -
Snap Ring/Pivot Pin
Part #: P-5399
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement snap ring for pivot pin.
– Two snap rings needed per assembly. -
Pivot Pin
Part #: P-570
Add to QuoteFor Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement pivot pin.
– Connects holder frame to pivot arm. -
Pivot Arm
Part #: PA-5271
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement pivot arm. -
Pinion Gear
Part #: PG-09
Add to QuoteFor Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ OD support roller diameter.
Features:
– Replacement Pinion Gear.
– 3.44″ Long.
– Precision machined to meet or exceed OEM specifications. -
Front Plate
Part #: PL-250-12
Add to QuoteFor Use With: 12″ KCO Style Double (Chip) Knife Holder Assembly
Features:
– Standard replacement front plate.
– 12″ Long -
Plow Shoes
Part #: Please Call
Add to QuoteFor Use With: Scheffer / Global Web Finishing plow folding equipment – 4.25″ diameter.
Features:
– Best used when plow folding light weight or single thickness paper.
– Precision machined and assembled from steel to meet or exceed OEM specifications.
– Custom manufactured left or right handed to customer specified widths and lengths.
– Fits .750″ diameter mounting shafts.Custom plow shoe widths and lengths can be manufactured upon request.
-
Perf Wheel – 3.03″ OD x 10 TPI
Part #: PW-10-303-866
Add to QuoteFor Use With: Scheffer, Global Web Finishing & I-Web equipment.
Features:
– Standard replacement perforation wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– 10 TPI or teeth (cuts) per inch
– Size of cut = .069″
– Size of tie = .031″
– Teeth per wheel = 95Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!
-
Perf Wheel – 3.03″ OD x 12 TPI
Part #: PW-12-303-866
Add to QuoteFor Use With: Scheffer, Global Web Finishing & I-Web equipment.
Features:
– Standard replacement perforation wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– 12 TPI or teeth (cuts) per inch
– Size of cut = .052″
– Size of tie = .031″
– Teeth per wheel = 114Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!
-
Perf Wheel – Cameron – 3.03″ OD x 16 TPI
Part #: PW-16-303-866
Add to QuoteFor Use With: Scheffer, Global Web Finishing & I-Web equipment.
Features:
– Standard Cameron style replacement perforation wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– 16 TPI or teeth (cuts) per inch
– Size of cut = .031″
– Size of tie = .031″
– Teeth per wheel = 152Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!
-
Perf Wheel – Cameron – 3.03″ OD x 8 TPI
Part #: PW-8-303-866
Add to QuoteFor Use With: Scheffer, Global Web Finishing & I-Web equipment.
Features:
– Standard Cameron style replacement perforation wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– 8 TPI or teeth (cuts) per inch
– Size of cut = .062″
– Size of tie = .062″
– Teeth per wheel = 76Our perf wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior perforation quality.
Perf wheels can be supplied with any combination of cut, tie, and depth dimensions upon request. We stock a huge inventory of pressroom perforation wheels for any application. – Please call!
CLICK HERE FOR A PRINTABLE SCALE VERSION OF OUR COMMON PERF WHEEL PATTERNS!
-
Quick Change Screw Housing Assembly – .866″ Bore
Part #: QC-614
Add to QuoteFor Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement “quick change” threaded screw housing assembly for use with .866″ ID slitter, perf, and score wheels.
– Includes knob, spring, screw housing, axle, slotted washer, two bearings, and two snap rings. -
Quick Change Screw Housing Assembly – .748″ Bore
Part #: QC-614-748
Add to QuoteFor Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement “quick change” threaded screw housing assembly for use with .748″ ID slitter, perf, and score wheels.
– Includes knob, spring, screw housing, axle, slotted washer, two bearings, and two snap rings. -
Air Regulator
Part #: R-20K
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement air regulator. -
5.00″ Diameter Plow Puck
Part #: RP-02C / C11428
Add to QuoteFor Use With: Scheffer rotary plows – 6.00″ diameter.
Features:
– Standard replacement plow puck.
– 5.00″ OD
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.
– Single beveled which greatly reduces gusseting, cracking, wrinkling and marking on heavier paper stocks. -
3.625″ Diameter Plow Puck
Part #: RP-03S / C21438
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary plows – 4.25″ diameter.
Features:
– Standard replacement plow puck.
– 3.625″ OD
– Precision machined and supplied with high-quality, double sealed low friction bearings to meet or exceed OEM specifications.
– Double beveled which greatly reduces gusseting, cracking, wrinkling and marking on heavier paper stocks. -
Axle/Nip Wheel
Part #: S-528A
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement nip wheel mounting axle.
– Connects nip wheel to pivot arm. -
Axle – .748″ Bore
Part #: SA-748
Add to QuoteFor Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement axle for use with .748″ ID slitter, perf, and score wheels. -
Axle – .866″ Bore
Part #: SA-866
Add to QuoteFor Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement axle for use with .866″ ID slitter, perf, and score wheels. -
Score Wheel -Cameron – 3.03″ OD x .748″ ID
Part #: SC-303-748-031
Add to QuoteFor Use With: Scheffer, Global Web Finishing & I-Web equipment.
Features:
– Standard Cameron style replacement score wheel.
– 3.03″ OD x .748″ ID x .244″ Thick
– Score radius = .041″
– Used to reduce gusseting, cracking, wrinkling and marking when plow folding on heavier paper stocks.
– Manufactured to exacting tolerances from premium quality 52100 steel. -
Score Wheel – Cameron – 3.03″ OD x .866″ ID
Part #: SC-303-866-031
Add to QuoteFor Use With: Scheffer, Global Web Finishing & I-Web equipment.
Features:
– Standard Cameron style replacement score wheel.
– 3.03″ OD x .866″ ID x .244″ Thick
– Score radius = .041″
– Used to reduce gusseting, cracking, wrinkling and marking when plow folding on heavier paper stocks.
– Manufactured to exacting tolerances from premium quality 52100 steel. -
Chip Removal Brush
Part #: SCRB-001
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard replacement chip removal brush
– Durable white delrin split core (two part) body.
– 4.375″ OD x 1.250″ ID x 1.50″ Wide
– .375″ high black nylon heavy duty bristles.Compare to: Scheffer Part# C15286
-
Die Rule Cutting Blade – 12″
Part #: SDR-012
Add to QuoteFor Use With: Scheffer / Global Web Finishing and Vits rotary cutters
Features:
– 12″ Long x .875″ High with 4 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
12″ – Heavy Duty Cutting Blade
Part #: SDR-012-04
Add to QuoteWalt Powley Inline’s exclusive heavy duty replacement cutting blade for use with Scheffer / Global Web Finishing and Vits rotary cutters.
Features:
– 12″ Long x .875″ High with 4 Notches.
– Heavy duty (thick) replacement cutting blade.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our heavy duty cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
12″ Heavy Duty & TNT Coated
Part #: SDR-012-04TIN
Add to QuoteExclusive Walt Powley Inline heavy-duty replacement cutting blade for use with Scheffer / Global Web Finishing and Vits rotary cutters.
Features:
– 12″ Long x .875″ High with 4 Notches.
– Heavy-duty (thick) replacement cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our heavy duty cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
“TNT” Coated Die Rule Cutting Blade – 12″
Part #: SDR-012TIN
Add to QuoteFor Use With: Scheffer / Global Web Finishing and Vits rotary cutters
Features:
– 12″ Long x .875″ High with 4 Notches.
– Premium replacement die rule cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
– Manufactured to exceed OEM specifications.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!
-
Die Rule Cutting Blade – 20″
Part #: SDR-020
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters
Features:
– 20″ Long x .875″ High with 8 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.Compare to: Scheffer Part# B20249
Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
20″ Heavy Duty & TNT Coated
Part #: SDR-020-04TIN
Add to QuoteExclusive Walt Powley Inline heavy-duty replacement cutting blade for use with Scheffer / Global Web Finishing and Vits rotary cutters.
Features:
– 20″ Long x .875″ High with 6 Notches.
– Heavy-duty (thick) replacement cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our heavy duty cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
Die Rule Cutting Blade – 24″
Part #: SDR-024
Add to QuoteFor Use With: Scheffer / Global Web Finishing and Vits rotary cutters
Features:
– 24″ Long x .875″ High with 8 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
24″ Heavy Duty & TNT Coated
Part #: SDR-024-04TIN
Add to QuoteExclusive Walt Powley Inline heavy-duty replacement cutting blade for use with Scheffer / Global Web Finishing and Vits rotary cutters.
Features:
– 24″ Long x .875″ High with 8 Notches.
– Heavy-duty (thick) replacement cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase life life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our heavy duty cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
“TNT” Coated Die Rule Cutting Blade – 24″
Part #: SDR-024TIN
Add to QuoteFor Use With: Scheffer / Global Web Finishing and Vits rotary cutters
Features:
– 24″ Long x .875″ High with 8 Notches.
– Premium replacement die rule cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
– Manufactured to exceed OEM specifications.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!
-
Die Rule Cutting Blade – 25″
Part #: SDR-025
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters
Features:
– 25″ Long x .875″ High with 12 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.Compare to: Scheffer Part# B36840
Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
Die Rule Cutting Blade – 28″
Part #: SDR-028
Add to QuoteFor Use With: Scheffer / Global Web Finishing and Vits rotary cutters
Features:
– 28″ Long x .875″ High with 10 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
Die Rule Cutting Blade – 36″
Part #: SDR-036
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters
Features:
– 36″ Long x .875″ High x 12 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
Die Rule Cutting Blade – 40″
Part #: SDR-040
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters
Features:
– 40″ Long x .875″ High x 16 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.Compare to: Scheffer Part# B21921
Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
“TNT” Coated Die Rule Cutting Blade – 40″
Part #: SDR-040-B-TIN
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters
Features:
– 40″ Long x .875″ High with 12 Notches.
– Premium replacement die rule cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
– Manufactured to exceed OEM specifications.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!
-
Die Rule Cutting Blade – 40″
Part #: SDR-040B
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters
Features:
– 40″ Long x .875″ High x 12 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.Compare to: Scheffer Part# B36841
Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
Die Rule Cutting Blade – 20″
Part #: SDR-620-06
Add to QuoteFor Use With: Scheffer / Global Web Finishing and Vits rotary cutters
Features:
– 20″ Long x .875″ High x 6 Notches.
– Standard replacement die rule cutting blade.
– Manufactured to exceed OEM specifications.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
“TNT” Coated Die Rule Cutting Blade – 20″
Part #: SDRE-020-06
Add to QuoteFor Use With: Scheffer / Global Web Finishing and Vits rotary cutters
Features:
– 20″ Long x .875″ High with 6 Notches.
– Premium replacement die rule cutting blade.
– Enhanced “TNT” cutting edge coating will dramatically increase knife life.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.
– Manufactured to exceed OEM specifications.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our “TNT” coated die rule cutting blades are manufactured to exacting height specifications (+/-.0005″) and include an enhanced cutting edge coating that provides maximum knife life and superior cut quality even against the most aggressive paper stocks!
-
Custom Perf Blades
Part #: See Below - Please Specify
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Custom perf blades for “Snap Pack” products that are perforated both head and foot.
– Used to produce perf/cut or perf/cut/perf or perf/cut-cut/perf products.
– 12″ Long x .875″ High with 4 Notches.8 TPI = .062″ Cut x .062″ Tie x .070″ Depth of Tie – Part #PB-8-062-062-S
8 TPI = .093″ Cut x .031″ Tie x .070″ Depth of Tie – Part #PB-8-093-031-S
10 TPI = .069″ Cut x .031″ Tie x .070″ Depth of Tie – Part #PB-10-069-031-S
12 TPI = .052″ Cut x .031″ Tie x .070″ Depth of Tie – Part #PB-12-052-031-S
16 TPI = .031″ Cut x .031″ Tie x .070″ Depth of Tie – Part #PB-16-031-031-SPerf blades can be supplied with any combination of cut, tie and depth dimensions upon request. – Please Call
* Please allow 5 business days to manufacture.
-
Nip Wheel – Rubber Covered
Part #: See Part #1-1897 & 1-5246
Add to QuoteFor Use With: Scheffer / Global Web Finishing , I-Web and Spec equipment.
Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.102″ ID x .750″ Wide
– .475″ bearing ID
– High-quality, double sealed, 6001RS low friction bearing. – Qty 2
– Covered with clear rubber urethane material. -
Short / Thick Mini Stripper Finger
Part #: SF-SPC
Add to QuoteFor Use With: WPM and Scheffer closed end mailer systems.
Features:
– Standard replacement phenolic stripper finger.
– Short / Thick angled stripper finger.
– Short /Mini body.
– Used for heavier weight paper stocks and overall thicker chips. -
20″ Knife Holder Front Plate – Modified
Part #: SFP-625-10M
Add to QuoteFor Use With: Scheffer rotary cutters with 5/8″ knife cylinder undercut.
Features:
– Modified 20″ replacement knife holder front plate.
– Precision machined from one piece solid tool steel – very durable.
– Exceeds OEM specifications. -
12″ Extra Heavy Duty Cutting Blade
Part #: SGR-012-06
Add to QuoteExclusive Walt Powley Inline extra heavy-duty replacement cutting blade for use with Scheffer / Global Web Finishing rotary cutters.
Features:
– 12″ Long x .875″ High with 4 Notches.
– Extra heavy-duty (6 point) replacement cutting blade.
– Best used for thick and/or aggressive paper stocks, two web inline / offline finishing systems and longer production runs.Walt Powley Inline, Inc. is the worldwide leading supplier of replacement cutting blades for use with Scheffer / Global Web Finishing rotary cutters. Our heavy duty cutting blades are manufactured to exacting height specifications and include a specialized cutting edge to maximize knife life and provide superior cut quality.
-
Screw Housing Assembly – .866″ Bore
Part #: SH-159
Add to QuoteFor Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement threaded screw housing assembly for use with .866″ ID slitter, perf, and score wheels.
– Includes screw housing, axle, washer, two bearings, and two snap rings. -
Screw Housing Assembly – .748″ Bore
Part #: SH-912-113
Add to QuoteFor Use With: Air slitter/perf/score wheel holder assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement threaded screw housing assembly for use with .748″ ID slitter, perf, and score wheels.
– Includes screw housing, axle, washer, two bearings, and two snap rings. -
Infeed Guide
Part #: SIG-90
Add to QuoteFor Use With: Scheffer rotary cutter infeed draw rollers.
Features:
– Standard replacement infeed guide.
– Manufactured from durable white delrin.
– Sold separately.Compare to: Scheffer Part # B20-2890 / P230094
-
12″ Traditional Style Scheffer / Global Web Finishing Knife Holder Assembly – 17.750″/35.500″ & 17.795″/35.590″ Circ.
Part #: SKA-12-35
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– 17.750″/35.500″ & 17.795″/35.590″ Circumference.
– Standard replacement 12″ traditional style knife holder assembly.
– Includes all knife holder mounting hardware (cap screws, washers and brass dovetail nuts) and choice of either a lead or trail edge t-Bar/front Plate.
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications. -
12″ Traditional Style Scheffer / Global Web Finishing Knife Holder Assembly – 22.750″/45.500″ – 24.803″/49.606″ Circ.
Part #: SKA-12-45
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– 22.750″/45.500″, 22.776″/45.552″, 22.8375″/45.675″, 23.00″/46.00″ & 24.803″/49.606″ Circumference.
– Standard replacement 12″ traditional style knife holder assembly.
– Includes all knife holder mounting hardware (cap screws, washers and brass dovetail nuts) and choice of either a lead or trail edge t-Bar/front Plate.
– Utilizes standard replacement 12″ (4 notch) cutting blade.
– Precision machined to meet or exceed OEM specifications. -
Kicker Wheel Brush – 38″ Wide Delivery Tables
Part #: SKB-001Y
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters with T.E.D. delivery tables.
Features:
– Standard replacement kicker wheel brush.
– White delrin core with durable yellow nylon crimped bristles.
– 2.00″ Wide x 1.00″ Tall x .375″ Thick
– 1.50″ approximate bristle length.SKB-001Y kicker brush is for use with full-web (16 page) 22.750″/45.500″, 22.776″/45.552″, 22.8375″/45.675″ & 23.00″/46.00″ circumference Scheffer rotary cutter delivery tables.
Compare to: Scheffer Part# B22542
-
Kicker Wheel Brushes – Rebristle Service
Part #: SKB-002R
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters with T.E.D. delivery tables.
Features:
– Allows reuse of kicker wheel brushes.
– New yellow nylon bristles.Ship your existing worn kicker wheel brushes to us and our rebristle service will remove and replace all old brush bristles with new yellow nylon bristles.
-
Kicker Wheel Brush – 38″ Wide Delivery Tables
Part #: SKB-002Y
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters with T.E.D. delivery tables.
Features:
– Standard replacement kicker wheel brush.
– White delrin core with durable yellow nylon crimped bristles.
– 2.375″ Wide x 1.00″ Tall x .375″ Thick
– 1.375″ approximate bristle length.SKB-002Y kicker brush is for use with full-web (16 page) 24.803″/49.606″ circumference Scheffer rotary cutter delivery tables.
Compare to: Scheffer Part# B22687
-
Kicker Wheel Brush – 26″ Wide Delivery Tables
Part #: SKB-003Y
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters with T.E.D. delivery tables.
Features:
– Standard replacement kicker wheel brush.
– White delrin core with durable yellow nylon crimped bristles.
– 1.50″ Wide x 1.00″ Tall x .375″ Thick
– 1.25″ approximate bristle length.SKB-003Y kicker brush is for use with half-web (8 page) 17.750″/35.500″& 17.795″/35.590″ circumference Scheffer rotary cutter delivery tables.
Compare to: Scheffer Part# B23174
-
Kicker Brush Mounting Screw
Part #: SKB-500S
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters with T.E.D. delivery tables.
Features:
– Standard replacement kicker brush mounting screw.
– Used to mount kicker brushes to kicker wheel assembly. -
Heavy Duty 12″ T-Bar/Front Plate
Part #: SKFP-12T
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Heavy Duty 12″ replacement T-Bar/Front Plate for use with traditional style knife holders.
– .150″ overall thickness.
– Best used when running chip sizes 3/8″ and larger.
– Precision machined from steel this is the most durable T-Bar/Front Plate available!
– Excellent general purpose T-Bar/Front Plate – can be used lead or trail edge. -
Thin 12″ T-Bar/Front Plate
Part #: SKFP-12TN
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Thin 12″ replacement T-Bar/Front Plate for use with traditional style knife holders.
– .062″ overall thickness.
– Best used when running chip sizes 3/8″ and smaller.
– Precision machined from steel to be durable.
– Excellent general purpose T-Bar/Front Plate – can be used lead or trail edge. -
Stripper Pin Removal Tool
Part #: SP-02R
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard stripper pin removal tool.
– Used to push/remove worn stripper pins from rotary cutter anvil cylinder.Compare to: Scheffer Part# C16514
-
Stripper Pin Insertion Tool
Part #: SP-IT02
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard stripper pin insertion tool.
– Used to insert stripper pins into rotary cutter anvil cylinder.Compare to: Scheffer Part# A17390
-
Snap Ring/Nip Wheel Axle
Part #: SR-1056
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement snap ring for nip wheel axle.
– Two snap rings needed per assembly. -
Retaining Washer For T-Bars/Front Plates
Part #: SS-10-24-625
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard replacement stainless steel retaining washer for traditional style knife holder T-Bars/Front Plates.
– Retaining washer is positioned between the split washer and knife holder body when mounting T-Bar/Front Plates to the traditional style knife holder. -
Tapered Stripper Pin
Part #: SSP-001T
Add to QuoteFor Use With: Scheffer / Global Web Finishing and Vits rotary cutters.
Features:
– Standard replacement tapered chip removal stripper pin. -
Straight Stripper Pin
Part #: SSP-002S
Add to QuoteFor Use With: Scheffer / Global Web Finishing and Vits rotary cutters.
Features:
– Standard replacement straight chip removal stripper pin. -
Large Diameter Straight Stripper Pin
Part #: SSP-155S
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Large diameter straight chip removal stripper pin.
– Larger plastic insert body diameter.
– Best used if standard diameter stripper pins are pushing into the anvil cylinder because of heavier paper stocks or thicker chips.
– Used when anvil cylinder pin holes are worn or over sized.Compare to: Scheffer Part # A32985
-
Large Diameter Tapered Stripper Pin
Part #: SSP-155T
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Large diameter tapered chip removal stripper pin.
– Larger plastic insert body diameter.
– Best used if standard diameter stripper pins are pushing into the anvil cylinder because of heavier paper stocks or thicker chips.
– Used when anvil cylinder pin holes are worn or over sized.Compare to: Scheffer Part # A32984
-
Skate (Quad) Ring
Part #: SSR-004
Add to QuoteFor Use With: Scheffer rotary cutters with skate delivery tables.
Features:
– Standard replacement skate (quad) ring.
– Manufactured from a durable non-marking polyurethane.Compare to: Scheffer Part# Q4326-C2507Y
-
Skate Wheel
Part #: SSW-1010 or A18039
Add to QuoteFor Use With: Scheffer rotary cutters with skate delivery tables.
Features:
– Standard replacement skate wheel for single wheel skate assembly.Compare to: Scheffer Part# A18039
-
Slitter Wheel – Cameron – 3.03″ OD x .748″ ID
Part #: SW-01-303-748
Add to QuoteFor Use With: Scheffer, Global Web Finishing and I-Web equipment.
Features:
– Standard Cameron style replacement slitter wheel.
– 3.03″ OD x .748″ ID x .244″ ThickOur slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.
We stock a huge inventory of pressroom slitter wheels for any application. – Please call!
-
Slitter Wheel – Cameron – 3.03″ OD x .866″ ID
Part #: SW-01-303-866
Add to QuoteFor Use With: Scheffer, Global Web Finishing and I-Web equipment.
Features:
– Standard Cameron style replacement slitter wheel.
– 3.03″ OD x .866″ ID x .244″ ThickOur slitter wheels are manufactured to exacting tolerances from high quality 52100 steel and are designed with a specialized cutting edge to maximize life and provide superior cut quality.
We stock a huge inventory of pressroom slitter wheels for any application. – Please call!
-
Nip Wheel – White Delrin – 3.00″ OD
Part #: TW-300W-03
Add to QuoteFor Use With: Scheffer / Global Web Finishing, I-Web and Spec equipment.
Features:
– Standard replacement air trolley wheel.
– 3.00″ OD x 1.125″ ID x .875″ Wide
– .500″ bearing ID
– Manufactured from delrin and supplied with high-quality, double sealed, R8RS low friction bearings. – Qty 2
– Meets or exceeds OEM specifications. -
Nip Wheel – White Delrin – 3.00″ OD
Part #: TW-300W-04
Add to QuoteFor Use With: Scheffer / Global Web Finishing, I-Web and Spec equipment.
Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.375″ ID x 1.00″ Wide
– .625″ bearing ID
– Manufactured from delrin and supplied with high-quality, double sealed, 1623RS low friction bearings -Qty 2
– Meets or exceeds OEM specifications. -
Nip Wheel – White Delrin – 3.00″ OD
Part #: TW-300W-07
Add to QuoteFor Use With: Scheffer / Global Web Finishing, I-Web and Spec equipment.
Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.102″ ID x .9375″ Wide
– .475″ bearing ID
– Manufactured from delrin and supplied with high-quality, double sealed, 6001RS low friction bearings -Qty 2
– Meets or exceeds OEM specifications. -
Nip Wheel – White Delrin – 3.04″ OD
Part #: TW-304W-01
Add to QuoteFor use with Scheffer, Global Web Finishing and I-Web equipment.
Features:
– Replacement air trolley wheel.
– 3.04″ OD x 1.374″ ID x 1.117″ wide
– Manufactured from delrin.
– Meets or exceeds OEM standards. -
Nip Wheel – White Delrin – 3.00″ OD
Part #: TW-3125W-04
Add to QuoteFor Use With: Scheffer / Global Web Finishing, I-Web and Spec equipment.
Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.60″ ID x 1.00″ Wide
– .866″ Bore – No Bearings
– Manufactured from delrin.
– Meets or exceeds OEM specifications. -
Nip Wheel – White Delrin – 3.00″ OD
Part #: TW-3125W-04-750
Add to QuoteFor Use With: Scheffer, Global Web Finishing and I-Web equipment.
Features:
– Replacement air trolley wheel.
– 3.00″ OD x 1.60″ ID x 1.00″ Wide
– .748″ Bore – No Bearings
– Manufactured from delrin.
– Meets or exceeds OEM specifications. -
Nip Wheel – Rubber Covered
Part #: TW-3150G-01-748
Add to QuoteFor Use With: Scheffer, Global Web Finishing, and I-Web equipment.
Features:
– Replacement air trolley wheel.
– 3.150″ OD x 1.70″ ID x .675″ Wide
– .748″ Bore – No Bearings
– Covered with green, non-marking, rubber urethane material.
– Meets or exceeds OEM specifications. -
Nip Wheel – Rubber Covered
Part #: TW-3150G-01-866
Add to QuoteFor Use With: Scheffer, Global Web Finishing, and I-Web equipment.
Features:
– Replacement air trolley wheel.
– 3.150″ OD x 1.70″ ID x .675″ Wide
– .866″ Bore – No Bearings
– Covered with green, non-marking, rubber urethane material.
– Meets or exceeds OEM specifications. -
Sleeve Valve
Part #: V-3W125
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement sleeve valve. -
Split Washer For T-Bars/Front Plates
Part #: W-10-24-625
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard replacement split washer for traditional style knife holder T-Bars/Front Plates.
– Split washer is positioned below the cap screw and above the retaining washer when mounting T-Bar/Front Plates to the traditional style knife holder body. -
Retaining Washer
Part #: W-18-8-250
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard replacement stainless steel retaining washer for traditional style knife holders.
– Retaining washer is positioned between the split washer and knife holder body. -
Split Washer
Part #: W-260-0487
Add to QuoteFor Use With: Scheffer / Global Web Finishing rotary cutters.
Features:
– Standard replacement split washer for traditional style knife holders.
– Split washer is positioned below the mounting cap screw and above the retaining washer within the knife holder body. -
Washer/Nip Wheel Axle
Part #: W-530
Add to QuoteFor Use With: Air trolley assemblies on Scheffer / Global Web Finishing angle bars, prefolders, seam gluers, pattern perforators, and plow towers.
Features:
– Replacement washer for nip wheel axle.
– Two washers needed per assembly.
Part not listed?
We are experts at sourcing and manufacturing spare parts and consumables. We are confident that we can find or manufacture you the parts your operation needs!